H3C交换机和锐捷交换机配置LACP聚合失败
- 0关注
- 0收藏，137浏览
问题描述：
H3C交换机和锐捷交换机配置LACP聚合失败
两边配置静态聚合可以聚合成功，由静态切换为动态聚合后就聚合失败了
Bridge-Aggregation100
Current state: DOWN
Line protocol state: DOWN
IP packet frame type: Ethernet II, hardware address: 600b-038a-a395
Description: Bridge-Aggregation100 Interface
Unknown-speed mode, unknown-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
PVID: 1049
Port link-type: Trunk
VLAN Passing: 10
VLAN permitted: 10
Trunk port encapsulation: IEEE 802.1q
Last clearing of counters: Never
Last 5 seconds input: 0 packets/sec 0 bytes/sec -%
Last 5 seconds output: 0 packets/sec 0 bytes/sec -%
Input (total): 35078164859 packets, 42578572230856 bytes
35009272199 unicasts, 67113119 broadcasts, 1779478 multicasts, 0 pauses
Input (normal): 35078164796 packets, - bytes
35009272199 unicasts, 67113119 broadcasts, 1779478 multicasts, 0 pauses
Input: 63 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, - overruns, 63 aborts
- ignored, - parity errors
Output (total): 24121423071 packets, 14608909133822 bytes
- 2024-12-09提问
- 举报
-
(0)
最佳答案
两端正常配置静态链路聚合后，先保证锐捷端正常配置为动态，
然后本端配置link-agg mode dy ， 然后看dis link-agg verbose
华三能看到两端都是s状态则正常
- 2024-12-09回答
- 评论(1)
- 举报
-
(0)
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing Port Status: S -- Selected, U -- Unselected, I -- Individual Port: A -- Auto port, M -- Management port, R -- Reference port Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation, D -- Synchronization, E -- Collecting, F -- Distributing, G -- Defaulted, H -- Expired Aggregate Interface: Bridge-Aggregation5 Aggregation Mode: Static Loadsharing Type: Shar Management VLANs: None Port Status Priority Oper-Key XGE1/0/27 U 32768 2 XGE2/0/27(R) S 32768 2 Aggregate Interface: Bridge-Aggregation100 Creation Mode: Manual Aggregation Mode: Dynamic Loadsharing Type: Shar Management VLANs: None System ID: 0x8000, dc07-f8ee-cb80 Local: Port Status Priority Index Oper-Key Flag XGE1/0/28 U 32768 1 1 {ACG} XGE2/0/28 U 32768 2 1 {ACG} Remote: Actor Priority Index Oper-Key SystemID Flag XGE1/0/28 32768 0 0 0x8000, 0000-0000-0000 {EF} XGE2/0/28 32768 0 0 0x8000, 0000-0000-0000 {EF}
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing Port Status: S -- Selected, U -- Unselected, I -- Individual Port: A -- Auto port, M -- Management port, R -- Reference port Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation, D -- Synchronization, E -- Collecting, F -- Distributing, G -- Defaulted, H -- Expired Aggregate Interface: Bridge-Aggregation5 Aggregation Mode: Static Loadsharing Type: Shar Management VLANs: None Port Status Priority Oper-Key XGE1/0/27 U 32768 2 XGE2/0/27(R) S 32768 2 Aggregate Interface: Bridge-Aggregation100 Creation Mode: Manual Aggregation Mode: Dynamic Loadsharing Type: Shar Management VLANs: None System ID: 0x8000, dc07-f8ee-cb80 Local: Port Status Priority Index Oper-Key Flag XGE1/0/28 U 32768 1 1 {ACG} XGE2/0/28 U 32768 2 1 {ACG} Remote: Actor Priority Index Oper-Key SystemID Flag XGE1/0/28 32768 0 0 0x8000, 0000-0000-0000 {EF} XGE2/0/28 32768 0 0 0x8000, 0000-0000-0000 {EF}