接口/子接口300 S等时间内的流量统计信息oid节点
子接口与主接口的MIB节点值一样。
1、对应主接口下配置sub-interface rate-statistic开启子接口统计
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] sub-interface rate-statistic
This configuration may make a negative effect on the performance. Are you sure to continue? [Y/N]:y
sub-interface rate-statistic
2、接口信息如下:
GigabitEthernet0/0.10
Last 300 second input: 0 packets/sec 0 bytes/sec 0%
Last 300 second output: 0 packets/sec 0 bytes/sec 0%
3、SNMP查询
[MSR3600]dis int g1/0/0
Last 120 second input: 8 packets/sec 814 bytes/sec 0%
Last 120 second output: 2 packets/sec 229 bytes/sec 0%
***** SNMP QUERY STARTED *****
1: ifName.1 (DisplayString) Aux1/0/0 [41.75.78.31.2F.30.2F.30 (hex)]
2: ifName.2 (DisplayString) GigabitEthernet1/0/0 [47.69.67.61.62.69.74.45.74.68.65.72.6E.65.74.31.2F.30.2F.30 (hex)]
***** SNMP QUERY STARTED *****
1: hh3cIfSpeedStatHCInPkts.1 (CounterBasedGauge64) 0
2: hh3cIfSpeedStatHCInPkts.2 (CounterBasedGauge64) 8
3: hh3cIfSpeedStatHCInPkts.3 (CounterBasedGauge64) 0
***** SNMP QUERY STARTED *****
1: hh3cIfSpeedStatHCInBytes.1 (CounterBasedGauge64) 0
2: hh3cIfSpeedStatHCInBytes.2 (CounterBasedGauge64) 814
***** SNMP QUERY STARTED *****
1: hh3cIfSpeedStatHCOutPkts.1 (CounterBasedGauge64) 0
2: hh3cIfSpeedStatHCOutPkts.2 (CounterBasedGauge64) 2
***** SNMP QUERY STARTED *****
1: hh3cIfSpeedStatHCOutBytes.1 (CounterBasedGauge64) 0
2: hh3cIfSpeedStatHCOutBytes.2 (CounterBasedGauge64) 229
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作