• 全部
  • 经验案例
  • 典型配置
  • 技术公告
  • FAQ
  • 全部
  • 全部
产品线
搜索
取消
案例类型
发布者
是否解决
是否官方
时间
高级搜索

Upgrade The Software Through BOOTROM

2020-06-24发表
  • 0关注
  • 0收藏,48浏览
粉丝:0人 关注:0人

组网及说明


1.1.1.2----1.1.1.1

问题描述

Upgrade The Software Through BOOTROM

过程分析

1.    Configure the PC address to 1.1.1.2  24

2.    Open TFTP software, such as 3CD, set the file storage location

 

3.    display version to check the version of the device.

[MSR810]dis version

H3C Comware Software, Version 7.1.064, Release 0707P24

Copyright (c) 2004-2020 New H3C Technologies Co., Ltd. All rights reserved.

H3C MSR810 uptime is 0 weeks, 0 days, 0 hours, 4 minutes

 

4.    Restart the device, and long press Ctrl+B when restarting the device to enter the bootrom.

 

<MSR810>reboot

Start to check configuration with next startup configuration file, please wait.........DONE!

This command will reboot the device. Continue? [Y/N]:Y

Now rebooting, please wait...

%Jan  1 00:09:47:099 2011 MSR810 DEV/5/SYSTEM_REBOOT: System is rebooting now.

@

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extended BootWare

 

****************************************************************************

*                                                                          *

*                   H3C MSR810 BootWare, Version 1.61                      *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.

 

Compiled Date       : May  5 2019

CPU ID              : 0xa

CPU L1 Cache        : 32KB

CPU L2 Cache        : 256KB

Memory Type         : DDR3 SDRAM

Memory Size         : 1024MB

Flash Size          : 256MB

PCB Version         : 2.0

 

 

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

 

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

 

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 3

 ==============<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5): 5

 

==========================<ETHERNET PARAMETER SET>==========================

|Note:       '.' = Clear field.                                            |

|            '-' = Go to previous field.                                   |

|         Ctrl+D = Quit.                                                   |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name         :MSR810-CMW710-R0809P25.ipe                      :

Target File Name       :MSR810-CMW710-R0809P25.ipe                       :

Server IP Address      :1.1.1.2

Local IP Address       :1.1.1.1

Subnet Mask           :255.255.255.0

Gateway IP Address    :1.1.1.2

 

 

=================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensure The Parameter Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5): 2

Loading.............................................................................................................................

..............................................................................................................................................

..............................................Done.

79714304 bytes downloaded!

Image file msr810-cmw710-boot-r0809p25.bin is self-decompressing...

Saving file flash:/msr810-cmw710-boot-r0809p25.bin ...................Done.

Image file msr810-cmw710-system-r0809p25.bin is self-decompressing...

Saving file flash:/msr810-cmw710-system-r0809p25.bin

...................................................................................................Done.

 

==================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|<Ensur Be Modified Before Downloading!>                    |

============================================================================

Enter your choice(0-5): 0

 

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 1

Loading the main image files...

Loading file flash:/msr810-cmw710-system-r0809p25.bin.......................

.............................................Done.

Loading file flash:/msr810-cmw710-security-r0809p25.bin....Done.

Loading file flash:/msr810-cmw710-voice-r0809p25.bin...Done.

Loading file flash:/msr810-cmw710-data-r0809p25.bin......Done.

Loading file flash:/msr810-cmw710-wifidog-r0809p25.bin...Done.

Loading file flash:/msr810-cmw710-wwd-r0809p25.bin...Done.

Loading file flash:/msr810-cmw710-boot-r0809p25.bin..........Done.

 

Image file flash:/msr810-cmw710-boot-r0809p25.bin is self-decompressing.....

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

.......................................................................

Done.

System image is starting...

Cryptographic algorithms tests passed.

Line con0 is available.

 

Press ENTER to get started.

 

<MSR810>%Jan  1 00:03:24:378 2011 MSR810 SHELL/5/SHELL_LOGIN: Console logged in from con0.

 

<MSR810>display version

H3C Comware Software, Version 7.1.064, Release 0809P25

Copyright (c) 2004-2020 New H3C Technologies Co., Ltd. All rights reserved.

H3C MSR810 uptime is 0 weeks, 0 days, 0 hours, 3 minutes


解决方法

NULL

0 个评论

该案例暂时没有网友评论

编辑评论

举报

×

侵犯我的权益 >
对根叔知了社区有害的内容 >
辱骂、歧视、挑衅等(不友善)

侵犯我的权益

×

泄露了我的隐私 >
侵犯了我企业的权益 >
抄袭了我的内容 >
诽谤我 >
辱骂、歧视、挑衅等(不友善)
骚扰我

泄露了我的隐私

×

您好,当您发现根叔知了上有泄漏您隐私的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您认为哪些内容泄露了您的隐私?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)

侵犯了我企业的权益

×

您好,当您发现根叔知了上有关于您企业的造谣与诽谤、商业侵权等内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到 zhiliao@h3c.com 邮箱,我们会在审核后尽快给您答复。
  • 1. 您举报的内容是什么?(请在邮件中列出您举报的内容和链接地址)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
  • 3. 是哪家企业?(营业执照,单位登记证明等证件)
  • 4. 您与该企业的关系是?(您是企业法人或被授权人,需提供企业委托授权书)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

抄袭了我的内容

×

原文链接或出处

诽谤我

×

您好,当您发现根叔知了上有诽谤您的内容时,您可以向根叔知了进行举报。 请您把以下内容通过邮件发送到zhiliao@h3c.com 邮箱,我们会尽快处理。
  • 1. 您举报的内容以及侵犯了您什么权益?(请在邮件中列出您举报的内容、链接地址,并给出简短的说明)
  • 2. 您是谁?(身份证明材料,可以是身份证或护照等证件)
我们认为知名企业应该坦然接受公众讨论,对于答案中不准确的部分,我们欢迎您以正式或非正式身份在根叔知了上进行澄清。

对根叔知了社区有害的内容

×

垃圾广告信息
色情、暴力、血腥等违反法律法规的内容
政治敏感
不规范转载 >
辱骂、歧视、挑衅等(不友善)
骚扰我
诱导投票

不规范转载

×

举报说明

提出建议

    +
<

亲~登录后才可以操作哦!

确定

你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作