统一管理矩阵(M8310)忘记密码怎么办
可先联系研发通过uis.db 文件进行修复,如果不行,则需要清除设备上的uis.db文件 ,将M8310设备上的UISM软件进行重启:
具体操作步骤如下:
1、<H3C>install deactivate feature flash:/uism-1.00.14-m8310.bin s 1 ------------------------------先卸载M8310设备上的UISM软件;
2、<H3C>delete /unreserved uis.db -------------------------------删除设备上残留的uis.db配置文件
The file cannot be restored. Delete flash:/uis.db?[Y/N]:y
Deleting the file permanently will take a long time. Please wait...
Deleting file flash:/uis.db... Done.
3、<H3C>install activate feature flash:/UISM-1.00.14-M8310.bin s 1 -----------------------------重新加载UISM软件;
Verifying the file flash:/uism-1.00.14-m8310.bin on slot 1..............Done.
Upgrade summary according to following table:
flash:/uism-1.00.14-m8310.bin
Running Version New Version
None 1.00.14
Slot Upgrade Way
1 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]:y
This operation maybe take several minutes, please wait...
这样操作后,就可以重新使用sysadmin\uis2014默认用户名和密码登入UISM软件了。这种恢复操作会丢失UISM上配置(之前添加的CVM\SW等设备管理),需要手动重新添加,但是不影响M8310上交换机配置,对业务是没有影响的。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作