下述内容适用于WA4320H-SI/WAP712H/WAP712C-LI款型,以WAP712C-LI为例。
WAP712C-LI工作在云模式下,版本为R1113P05-OASIS,上电启动后提示:System has started up. To manage the device, you can log in to the Oasis platform or lognterface of the device through the management Wi-Fi.
此时,如果需要将云模式切换为瘦模式,可以在设备上电启动时进入bootware界面完成切换。
下面贴出(一)从AC下载版本并注册上线的操作方法
主要思路:1 在AC上做好AP上线前的准备
2 在AP上电启动过程中,Ctrl+B进入EXTENDED-BOOTWARE,之后Ctrl+Y选择AP Mode
3 看到Changed to fit mode successfully! Please reboot the system now!就说明切换成功了,此时需要继续按<0> Reboot
4 等到AP从AC下载版本并注册上线
1 首先在AC上做好AP上线前的准备
System View: return to User View with Ctrl+Z.
[H3C]wlan ap ap1 model WAP712C-LI
[H3C-wlan-ap-ap1]serial-id xxxxxxxxxxxx
[H3C-wlan-ap-ap1]QUIT
[H3C]dhcp server ip-pool VLAN1
[H3C-dhcp-pool-vlan1]network 192.168.0.100 24
[H3C-dhcp-pool-vlan1]gateway-list 192.168.0.100
[H3C-dhcp-pool-vlan1]QUI
[H3C]dhcp enable
[H3C]DIS WLAN AP ALL
Total number of APs: 1
Total number of connected APs: 0
Total number of connected manual APs: 0
Total number of connected auto APs: 0
Total number of connected common APs: 0
Total number of connected WTUs: 0
Total number of inside APs: 0
Maximum supported APs: 40
Remaining APs: 40
Total AP licenses: 10
Local AP licenses: 10
Server AP licenses: 0
Remaining Local AP licenses: 10
Sync AP licenses: 0
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name APID State Model Serial ID
ap1 1 I WAP712C-LI xxxxxxxxxx
2 在AP上电启动过程中,Ctrl+B进入EXTENDED-BOOTWARE,之后Ctrl+Y选择AP Mode
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...............................
Done!
****************************************************************************
* *
* H3C WAP712C-LI-OASIS BootWare, Version 7.19 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Dec 23 2019
CPU Type : ATHEROS AR9563
CPU L1 Cache : 32KB
CPU Clock Speed : 775MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> BootWare Operation Menu |
|<0> Reboot |
============================================================================
Ctrl+Y: Change AP Mode
Enter your choice(0-4):
Please select the new mode
Current mode is Oasis
============================================================================
|NO. Mode |
|1 Oasis Mode |
|2 Fit Mode |
|0 Exit |
============================================================================
Enter your choice(0-2):2 \\切换AP模式
This operation takes several minutes.Please wait...
Something wrong with the file.
Changed to fit mode successfully! Please reboot the system now!
==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> BootWare Operation Menu |
|<0> Reboot |
============================================================================
Ctrl+Y: Change AP Mode
Enter your choice(0-4): 0
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...............................
Done!
****************************************************************************
* *
* H3C WAP712C-LI BootWare, Version 7.19 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Dec 23 2019
CPU Type : ATHEROS AR9563
CPU L1 Cache : 32KB
CPU Clock Speed : 775MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main boot and system image files...
The system image does not exist!
Loading the backup boot and system image files...
The image does not exist!
Booting image fails!
Trying to get the IP address from the DHCP server......
DHCP server"s IP address is 192.168.0.100
Client"s assigned address is 192.168.0.2
DNS domain name got from DHCP server is
DNS server"s IP address is 0.0.0.0
Default Gateway"s IP address is 192.168.0.100
This client"s subnet mask is 255.255.255.0
The length of option 43 is: 0
Change State : Idle to Broadcast Discovery
Change State : Broadcast Discovery to Join
Change State : Join to JoinAck
Change State : JoinCfm to Image Download \\AP开始下载版本
........................................................
............................................................................
.
Image file wa4300s-boot.bin is self-decompressing...
Saving file flash:/wa4300s-boot.bin ........................................
....................................................................Done.
Image file wa4300s-system.bin is self-decompressing...
Saving file flash:/wa4300s-system.bin ......................................
............................................................................
............................................................................
............................................................................
............................................................................
............................................................................
.........................................Done.
Rebooting......
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...............................
Done!
****************************************************************************
* *
* H3C WAP712C-LI BootWare, Version 7.19 *
* *
****************************************************************************
Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.
Compiled Date : Dec 23 2019
CPU Type : ATHEROS AR9563
CPU L1 Cache : 32KB
CPU Clock Speed : 775MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main boot and system image files...
Loading file flash:/wa4300s-system.bin......................................
............................................................................
............................................................................
...........................................................................
Done.
Loading file flash:/wa4300s-boot.bin........................................
....................Done.
Extended BootWare Version is not equal,updating? [Y/N]
Updating Extended BootWare...........Done.
BootWare updated,System is rebooting now.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing...................................
..Done!
****************************************************************************
* *
* H3C WAP712C-LI BootWare, Version 7.20 *
* *
****************************************************************************
Copyright (c) 2004-2020 New H3C Technologies Co., Ltd.
Compiled Date : Jun 18 2020
CPU Type : ATHEROS AR9563
CPU L1 Cache : 32KB
CPU Clock Speed : 775MHz
Memory Type : SDRAM
Memory Size : 128MB
Memory Speed : 560MHz
BootWare Size : 512KB
Flash Size : 16MB
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main boot and system image files...
Loading file flash:/wa4300s-system.bin......................................
............................................................................
............................................................................
...........................................................................
Done.
Loading file flash:/wa4300s-boot.bin........................................
....................Done.
Image file flash:/wa4300s-boot.bin is self-decompressing....................
............................................................................
............................................................................
...................................Done.
System image is starting...
Startup configuration file doesn"t exist or is invalid.
Line con0 is available.
Press ENTER to get started.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作