问:我司设备MAC认证上传的用户名MAC地址格式参照哪种格式标准,是否有统一要求?
答:我司MAC认证上次MAC地址格式参照国际标准规范,取自RFC3580。
国际标准规范:
3.21. Calling-Station-Id
For IEEE 802.1X Authenticators, this attribute is used to store the
Supplicant MAC address in ASCII format (upper case only), with octet
values separated by a "-". Example: "00-10-A4-23-19-C0".
3.20. Called-Station-Id
For IEEE 802.1X Authenticators, this attribute is used to store the
bridge or Access Point MAC address in ASCII format (upper case only),
with octet values separated by a "-". Example: "00-10-A4-23-19-C0".
In IEEE 802.11, where the SSID is known, it SHOULD be appended to the
Access Point MAC address, separated from the MAC address with a ":".
Example "00-10-A4-23-19-C0:AP1".
以上取自RFC3580,关于callding-station-id和called-station-id有明确清晰的定义(MAC大写,5个“-“),无论设备侧还是服务器侧都应当按照国际标准来。
既然RFC已经习惯上把MAC地址格式定义成XX-XX-XX-XX-XX-XX这种形式,那么username顺理成章也应当采用这样的格式。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作