无
5560-Hi对LSWM2SP8P板卡不识别,插在扩展槽1和2均提示不支持。
使用扩展卡上的接口前,需要先执行port-configuration-mode命令配置接口模块扩展卡的工作模式,使接口模块扩展卡上的接口可正常使用。
配置完成后需要重启设备,接口模块扩展卡工作模式配置才生效。可通过display port-configuration-mode status命令来查看接口模块扩展卡的工作模式:
【解决方案】
系统视图下,port-configuration-mode,需要配置成模式1
https://www.h3c.com/cn/d_201912/1252412_30005_0.htm
1.1.19 port-configuration-mode
port-configuration-mode命令用配置接口模块扩展卡工作模式。
undo port-configuration-mode命令用来恢复缺省情况。
【命令】
port-configuration-mode slot slot-number { 0 | 1 }
undo port-configuration-mode slot slot-number
【缺省情况】
接口模块扩展卡工作模式为模式0。
【视图】
系统视图
【缺省用户角色】
network-admin
【参数】
slot slot-number:配置指定成员设备的接口模块扩展卡工作模式,slot-number表示设备在IRF中的成员编号。
0 :表示配置接口模块扩展卡工作模式为模式0。
1 :表示配置接口模块扩展卡工作模式为模式1。S5560-32C-HI和S5560-38C-HI-XG不支持模式1。
【使用指导】
对于S5560-56C-HI、S5560-56F-HI和S5560-56C-PWR-HI交换机:
修改接口模块扩展卡工作模式后,需要重启设备,接口模块扩展卡工作模式配置才生效。
对于S5560-32C-HI交换机,仅支持配置接口模块扩展卡工作模式为模式0:
对于S5560-38C-HI-XG交换机,仅支持配置接口模块扩展卡工作模式为模式0:
【举例】
# 配置成员设备1的接口模块扩展卡工作模式为模式1。
<Sysname> system-view
[Sysname] port-configuration-mode slot 1 1
Reboot device to make the configuration take effect.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作