某局点 WA4620i-ACN V7瘦AP切换为V5胖AP经验案例

现场AP型号WA4620i-ACN本来挂在V7 AC上，先由于客户需求，需要将其切换成胖AP独立工作，但此型号AP只有V5的胖版本。代理商按照正常胖瘦切换的流程不成功。

1、 查看当前AP的版本为V7瘦版本

<H3C>dis version

H3C Comware Software, Version 7.1.064, Release 2219

Copyright (c) 2004-2017 New H3C Technologies Co., Ltd. All rights reserved.

H3C WA4620i-ACN uptime is 0 weeks, 0 days, 0 hours, 1 minute

Last reboot reason : Power on

 

Boot image: flash:/wa4600-boot.bin

Boot image version: 7.1.064, Release 2219

  Compiled Dec 19 2017 16:00:00

System image: flash:/wa4600-system.bin

System image version: 7.1.064, Release 2219

  Compiled Dec 19 2017 16:00:00

 

with 1 APM86791 1000MHz Processor

256M bytes DDR3

32M bytes NorFlash Memory

 

Hardware Version is Ver.A

CPLD Version is 006

Basic Bootrom Version is 2.04

Extend Bootrom Version is 7.04

[Subslot 0]H3C WA4620i-ACN Hardware Version is Ver.A

[SLOT 1]GE1/0/1     (Hardware)Ver.A, (Driver)1.0

[SLOT 1]GE1/0/2     (Hardware)Ver.A, (Driver)1.0

[SLOT 1]RADIO1/0/1  (Hardware)Ver.A, (Driver)1.0

[SLOT 1]RADIO1/0/2  (Hardware)Ver.A, (Driver)1.0

 

2、重启设备并格式化之前的版本

<H3C>reboot

Start to check configuration with next startup configuration file, please wait.........DONE!

Current configuration may be lost after the reboot, save current configuration? [Y/N]:n

This command will reboot the device. Continue? [Y/N]:y

Now rebooting, please wait...

%Jan 15 14:45:44:590 2018 H3C DEV/5/SYSTEM_REBOOT: System is rebooting now.

 

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare

The Extend BootWare is self-decompressing............Done!

 

****************************************************************************

*                                                                          *

*                 H3C WA4620i-ACN BootWare, Version 7.04                   *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.

 

Compiled Date       : Mar 21 2017

CPU Type            : APM86791

CPU L1 Cache        : 32KB

CPU Clock Speed     : 1000MHz

Memory Type         : DDR3 SDRAM

Memory Size         : 256MB

BootWare Size       : 512KB

Flash Size          : 32MB

CPLD Version        : 006

PCB Version         : Ver.A

 

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

 

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

 

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System                        

|<2> Enter Serial SubMenu                

|<3> Enter Ethernet SubMenu                                   

|<4> File Control                                                

|<5> Restore to Factory Default Configuration                    

|<6> Skip Current System Configuration                               

|<7> BootWare Operation Menu                                           

|<8> Skip Authentication for Console Login                            

|<9> Storage Device Operation                      

|<0> Reboot                            

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9):

Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....

............................................................................

..................

Format success.//格式化成功

3、上传V5胖版本文件，更新bootware

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System                     

|<2> Enter Serial SubMenu                 

|<3> Enter Ethernet SubMenu          

|<4> File Control                             

|<5> Restore to Factory Default Configuration      

|<6> Skip Current System Configuration             

|<7> BootWare Operation Menu               

|<8> Skip Authentication for Console Login                   

|<9> Storage Device Operation                           

|<0> Reboot                                                  

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9):

 

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System                               

|<2> Enter Serial SubMenu                  

|<3> Enter Ethernet SubMenu                     

|<4> File Control                                                

|<5> Restore to Factory Default Configuration                     

|<6> Skip Current System Configuration                           

|<7> BootWare Operation Menu                                   

|<8> Skip Authentication for Console Login                       

|<9> Storage Device Operation                                    

|<0> Reboot                                               

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Enter your choice(0-9): 3

 

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                  

|<1> Download Image Program To SDRAM And Run                 

|<2> Update Main Image File                                   

|<3> Update Backup Image File                                  

|<4> Download Files(*.*)                                 

|<5> Modify Ethernet Parameter                             

|<0> Exit To Main Menu                                      

|<Ensure The Parameter Be Modified Before Downloading!>           

============================================================================

Enter your choice(0-5): 5

 

==========================<ETHERNET PARAMETER SET>==========================

|Note:       &＃39;.&＃39; = Clear field.                                

|            &＃39;-&＃39; = Go to previous field.                         

|         Ctrl+D = Quit.                                    

============================================================================

Protocol (FTP or TFTP) :tftp ftp

Load File Name         :wa4600_fat.bin

                       :wa4600_fat.bin

Target File Name       :wa4600_fat.bin

                       :wa4600_fat.bin

Server IP Address      :192.168.0.1 2.2.2.2

Local IP Address       :192.168.0.2 2.2.2.1

Subnet Mask            :0.0.0.0 

Gateway IP Address     :0.0.0.0

FTP User Name          :123

FTP User Password      :****** ***

 

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                               

|<1> Download Image Program To SDRAM And Run                    

|<2> Update Main Image File                                      

|<3> Update Backup Image File                                    

|<4> Download Files(*.*)                                    

|<5> Modify Ethernet Parameter                                    

|<0> Exit To Main Menu                                           

|<Ensure The Parameter Be Modified Before Downloading!>            

============================================================================

Enter your choice(0-5): 1

Loading.....................................................................

..................Done.

12189696 bytes downloaded!

The image is self-decompressing.............................................

............................................................................

............................................................................

............................................................................

...................................................................Done.

Extended BootWare Version is not equal,updating? [Y/N] Y

Updating Extended BootWare..........Done.//升级bootware成功

BootWare updated,System is rebooting now.

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare

The Extend BootWare is self-decompressing..........Done!//bootware启动成功

 

4、再次上传版本并更新启动版本文件

****************************************************************************

*                                                                          *

*                 H3C WA4620i-ACN BootWare, Version 2.05                   *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2016 Hangzhou H3C Technologies Co., Ltd.

 

Compiled Date       : Jun 12 2016

CPU Type            : APM86791

CPU L1 Cache        : 32KB

CPU Clock Speed     : 1000MHz

Memory Type         : SDRAM

Memory Size         : 256MB

BootWare Size       : 512KB

Flash Size          : 32MB

CPLD Version        : 006

PCB Version         : Ver.A

 

 

Read net params from bootrom failed, use the default value

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

BootWare password: Not required. Please press Enter to continue.

 

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

 

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                              

|<2> Enter Serial SubMenu                                    

|<3> Enter Ethernet SubMenu                           

|<4> File Control                                              

|<5> Restore to Factory Default Configuration                     

|<6> Skip Current System Configuration                        

|<7> BootWare Operation Menu                                      

|<8> Clear Super Password                                  

|<9> Storage Device Operation                                 

|<0> Reboot                                           

============================================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9):

Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....

............................................................................

..................

Format success.//再次格式化

 

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                             

|<2> Enter Serial SubMenu                                       

|<3> Enter Ethernet SubMenu                                  

|<4> File Control                                      

|<5> Restore to Factory Default Configuration                   

|<6> Skip Current System Configuration                       

|<7> BootWare Operation Menu                                    

|<8> Clear Super Password                                             

|<9> Storage Device Operation                                      

|<0> Reboot                                                       

============================================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9):

 

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                  

|<2> Enter Serial SubMenu                                            

|<3> Enter Ethernet SubMenu                                          

|<4> File Control                                                     

|<5> Restore to Factory Default Configuration                           

|<6> Skip Current System Configuration                                

|<7> BootWare Operation Menu                                          

|<8> Clear Super Password                                            

|<9> Storage Device Operation                                       

|<0> Reboot                                                        

============================================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 3

 

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                    

|<1> Download Application Program To SDRAM And Run                    

|<2> Update Main Application File                                       

|<3> Modify Ethernet Parameter                                          

|<0> Exit To Main Menu                                                  

|<Ensure The Parameter Be Modified Before Downloading!>                 

============================================================================

Enter your choice(0-3): 3

 

==========================<ETHERNET PARAMETER SET>==========================

|Note:       &＃39;.&＃39; = Clear field.                                            |

|            &＃39;-&＃39; = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP) :ftp ftp

Load File Name         :wa4600_fat.bin

                       :wa4600_fat.bin

Target File Name       :wa4600_fat.bin

                       :

Server IP Address      :2.2.2.2

Local IP Address       :2.2.2.1

Gateway IP Address     :0.0.0.0

FTP User Name          :123

FTP User Password      :123

 

 

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                     

|<1> Download Application Program To SDRAM And Run                        

|<2> Update Main Application File                                     

|<3> Modify Ethernet Parameter                                         

|<0> Exit To Main Menu                                                 

|<Ensure The Parameter Be Modified Before Downloading!>                

============================================================================

Enter your choice(0-3): 2

Loading.....................................................................

..................Done!

12189696 bytes downloaded!

Updating File flash:/wa4600_fat.bin.........................................

............................................................................

.......................................................................Done!//重新下载和更新版本

 

5、完成所有更新后，重启设备

==========================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash                                      

|<1> Download Application Program To SDRAM And Run                       

|<2> Update Main Application File                                       

|<3> Modify Ethernet Parameter                                     

|<0> Exit To Main Menu                                                

|<Ensure The Parameter Be Modified Before Downloading!>              

============================================================================

Enter your choice(0-3): 0

 

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System                                                      

|<2> Enter Serial SubMenu                                             

|<3> Enter Ethernet SubMenu                                         

|<4> File Control                                                   

|<5> Restore to Factory Default Configuration                            

|<6> Skip Current System Configuration                               

|<7> BootWare Operation Menu                                          

|<8> Clear Super Password                                              

|<9> Storage Device Operation                                        

|<0> Reboot                                                          

============================================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 0

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare

The Extend BootWare is self-decompressing..........Done!

 

****************************************************************************

*                                                                          *

*                 H3C WA4620i-ACN BootWare, Version 2.05                   *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2016 Hangzhou H3C Technologies Co., Ltd.

 

Compiled Date       : Jun 12 2016

CPU Type            : APM86791

CPU L1 Cache        : 32KB

CPU Clock Speed     : 1000MHz

Memory Type         : SDRAM

Memory Size         : 256MB

BootWare Size       : 512KB

Flash Size          : 32MB

CPLD Version        : 006

PCB Version         : Ver.A

 

 

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

Starting to get the main application file--flash:/wa4600_fat.bin!...........

............................................................................

............................................................................

.......................

The main application file is self-decompressing.............................

............................................................................

............................................................................

............................................................................

............................................................................

.......Done!

System application is starting...

Startup configuration file does not exist.

User interface con0 is available.

 

 

Press ENTER to get started.

<WA4620i-ACN>

#Jan  1 00:00:18:046 2009 WA4620i-ACN SHELL/4/LOGIN:

 Trap 1.3.6.1.4.1.25506.2.2.1.1.3.0.1<hh3cLogIn>: login from Console

%Jan  1 00:00:18:047 2009 WA4620i-ACN SHELL/5/SHELL_LOGIN: Console logged in from con0.

6、查看版本文件，切换成功。

<WA4620i-ACN>dis version

H3C Comware Platform Software

Comware Software, Version 5.20, Release 1508P03

Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.

H3C WA4620i-ACN uptime is 0 week, 0 day, 0 hour, 0 minute

 

 CPU type: APM86791

 256M bytes DDR3 SDRAM Memory

 32M bytes Flash Memory

 Pcb             Version:  Ver.A

 CPLD            Version:  006

 Basic  BootROM  Version:  2.04

 Extend BootROM  Version:  2.05

 [SLOT  1]CON           (Hardware)Ver.A,        (Driver)1.0,    (Cpld)6.0

 [SLOT  1]GE1/0/1       (Hardware)Ver.A,        (Driver)1.0,    (Cpld)6.0

 [SLOT  1]GE1/0/2       (Hardware)Ver.A,        (Driver)1.0,    (Cpld)6.0

 [SLOT  1]RADIO1/0/1    (Hardware)Ver.A,        (Driver)1.0,    (Cpld)6.0

 [SLOT  1]RADIO1/0/2    (Hardware)Ver.B,        (Driver)1.0,    (Cpld)6.0

 

 

1、在AP胖瘦切换之前，要先确认AP是否支持胖版本；

2、V7的瘦AP切换为V5的胖AP需要上传两次软件版本，第一次更新bootware，第二次更新AP的启动版本文件；

3、在加载版本文件的过程中，有可能出现提示失败的情况，这时候可以更换地址，ftp/tftp方式尝试；