MSR路由器软件版本命令行怎么升级?
1. 从H3C官网(http://www.h3c.com.cn/)下载设备软件版本
1) 将鼠标箭头放在H3C官网首页上方的“服务支持”上,在弹出的页面上选择“文档与软件”下面的选项“软件下载”。
2) 在“按产品检索”栏选择“路由器”
3) 找到对应型号的路由器并选择版本文件下载即可,如下载需要用户名和密码,请使用yx800和01230123。
2. 将下载好的软件版本上传到设备的存储介质里,如果您不知道如何上传设备软件版本,请搜索“MSR路由器如何向设备中传文件?”
3. 指定设备下次启动文件
<H3C>boot-loader file flash:/MSR3600-CMW710-R0306P30.bin main (slot 1) // flash:/后面跟的就是我们需要升级到的软件版本的文件名,框式设备升级的话最后需要加上slot 1命令。
This command will set the boot file of the specified board. Continue? [Y/N]:y
<H3C>save The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
Validating file. Please wait.....................
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully.
<H3C>reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
This command will reboot the device. Current configuration will be lost, save current configuration? [Y/N]:y
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作