{"code":200,"msg":"ok","totalpages":10,"data":[{"data_id":"97761","title":"SecPath F1000-S-AI+域内互访问题请教","content":"
\n \n <\/i><\/i><\/div>
<\/i><\/i><\/div>
<\/i><\/i><\/div>
<\/i><\/i><\/div>
\n \n <\/i><\/i><\/div>
\n \n <\/i><\/i><\/div>
<\/i><\/i><\/div>
<\/i><\/i><\/div><\/div>

三个解决划分至trust区域，访问控制开启trust到trust的策略，但是域间访问不了<\/p><\/div><\/div>","cates_id":"428","cates_name":"包过滤","clickNum":"1793","zan":"0","replyNum":"4","type":"questions"},{"data_id":"169683","title":"H3C UIS-Cell3010G3硬盘识别不到问题","content":"

安装时候识别不到硬盘<\/p><\/div>","cates_id":"330","cates_name":"Linux系统安装","clickNum":"2479","zan":"0","replyNum":"3","type":"questions"},{"data_id":"169857","title":"H3C UIS-Cell3010G3 RAID卡驱动","content":"

装操作系统的时候识别不到硬盘，请问下有这个型号的相关驱动吗<\/p><\/div>","cates_id":"330","cates_name":"Linux系统安装","clickNum":"3478","zan":"0","replyNum":"3","type":"questions"},{"data_id":"259359","title":"怎么更换频率","content":"

从5g切换为2.4G频率<\/p>","cates_id":"33","cates_name":"IPv6","clickNum":"737","zan":"0","replyNum":"1","type":"questions"},{"data_id":"319874","title":"内网环境下使用华三云服务器，keepalived vip无法ping通","content":"

请教各位大佬！！！在A、B两台机器上部署了nginx+keepalived，此时vip在A机器的网卡下， 但是B或者其他服务器都ping不通vip！！当vip漂移到B服务器时A或者其他服务器也ping不通，是否要在云平台做些配置<\/p>","cates_id":"776,777","cates_name":"H3Cloud CAS,H3Cloud Desktop","clickNum":"406","zan":"0","replyNum":"3","type":"questions"},{"data_id":"286465","title":"E","content":"

IMC只有EIA和EAP授权，没有终端识别授权EIP，但是我看在线用户的详细信息又可以看到在线用户的设备类型和型号。那这种可以实现Portal认证的时候，比如我创建一个用户，限制两个终端登录，并且登录用户的类型只能是一个电脑端一个手机端吗。<\/p>","cates_id":"46","cates_name":"OSPF","clickNum":"861","zan":"0","replyNum":"1","type":"questions"},{"data_id":"12260","title":"S7502E S3610E","content":"

7502E的版本 v520  r6605P03    3610的版本v520  r5301<\/p>

想做一条拒绝任何源访问目标地址的22端口的策略，配了qos，也应用到接口上，但是没生效，请问是该设备不支持封禁端口吗？<\/p>

traffic classifier port operator and<\/p>

\r\n if-match acl 3400<\/p>

traffic behavior port
<\/p>

filter deny<\/p>

qos policy port
<\/p>

classifier port behavior port<\/p>


<\/p>

acl number 3400
<\/p>

rule 5 deny tcp destination  10.217.5.123 0 destination-port eq 22  
<\/p>

rule 10 deny tcp \r\ndestination-port eq 22    这样我也写过，也还是不行，
<\/p>


<\/p>

interface GigabitEthernet1\/1\/2<\/p>

qos apply policy port inbound      3610上只能写 inbound   7502上可以写双向的但也还是不行。
<\/p>


<\/p>","cates_id":"56","cates_name":"QoS","clickNum":"2375","zan":"0","replyNum":"2","type":"questions"},{"data_id":"132620","title":"CAS E07、E05、E07版本的区别","content":"

\n \n <\/i><\/i><\/div>
<\/i><\/i><\/div>
<\/i><\/i>

设置列表<\/p>

  • <\/i> 有序列表<\/span><\/li>
  • <\/i> 无序列表<\/span><\/li><\/ul><\/div><\/div>
    <\/i><\/i><\/div>
    \n \n <\/i><\/i><\/div>
    \n \n <\/i><\/i><\/div>
    <\/i><\/i><\/div>
    <\/i><\/i><\/div><\/div>

    请问CAS E03与E05、E07版本的区别？<\/p>

    在华三官网软件下载中有如上三个版本，发现E0535最近版是去年的，但是E03版本今年也有更新，请问该下载哪个版本更好呢？目前本地CVM是E0513版本，想进行CVM升级<\/p><\/div><\/div>","cates_id":"776,779,803","cates_name":"H3Cloud CAS,CVM,安装","clickNum":"3068","zan":"0","replyNum":"5","type":"questions"},{"data_id":"121664","title":"S7003E和S7006E","content":"一台S7003E，一台S7006E，可以做堆叠吗","cates_id":"644,643","cates_name":"IRF2,堆叠","clickNum":"1785","zan":"0","replyNum":"5","type":"questions"},{"data_id":"122587","title":"M60+MINIA51-E+MINIA20-E","content":"

    \n \n <\/i><\/i><\/div>
    <\/i><\/i><\/div>
    <\/i><\/i><\/div>
    <\/i><\/i><\/div>
    \n \n <\/i><\/i><\/div>
    \n \n <\/i><\/i><\/div>
    <\/i><\/i><\/div>
    <\/i><\/i><\/div><\/div>

    现组网M60+minia51+miniA20组网 A51没掉线，A20掉了很多，什么原因会导致这样的问题出现呢<\/p><\/div><\/div>","cates_id":"170","cates_name":"wlan优化","clickNum":"1757","zan":"0","replyNum":"2","type":"questions"}]}