WA5320X的蓝牙功能怎么开启

配置AC接口

# 创建VLAN 1及其对应的VLAN接口，配置VLAN 1的接口IP地址， AC将使用该接口的IP地址与AP建立CAPWAP隧道。

<AC> system-view

[AC] vlan 1

[AC-vlan1] quit

[AC] interface vlan-interface 1

[AC-Vlan-interface1] ip address 109.0.0.7 24

[AC-Vlan-interface1] quit

# 创建手工AP，名称为k，并配置序列号。

<AC> system-view

[AC] wlan ap k model WA4320-ACN-B

[AC-wlan-ap-k] serial-id 210236A35VA11A100678ACNB

#进入module视图，配置moudule使能和module类型

[AC-wlan-ap-k] module 1

[AC-wlan-ap-k-module-1] module enable

[AC-wlan-ap-k-module-1] type BLE

# 开启BLE定位功能。

[AC-wlan-ap-k] rfid-tracking ble enable

#配置服务器地址和端口号

[AC-wlan-ap-k] rfid-tracking ble engine-address 172.17.0.100 engine-port 1145

#开启邻居上报功能

[AC-wlan-ap-k] rfid-tracking ble report enable

#配置BLE默认指令密码

[AC-wlan-ap-k] rfid-tracking ble command-password simple AprilBrother

#设置邻居上报周期

[AC-wlan-ap-k] rfid-tracking ble report interval 5