现场部分配置如下:
interface Ten-GigabitEthernet2/1/3
port link-mode route
port link-aggregation group 2
#
interface Ten-GigabitEthernet2/1/4
port link-mode route
port link-aggregation group 2
===============display device verbose===============
Slot No. Brd Type Brd Status Software Version
0 CSR07SRPUD3 Master SR8800-CMW710-R7951P10
1 CSR07SRPUD3 Standby SR8800-CMW710-R7951P10
2 CSPEX-1304S Normal SR8800-CMW710-R7951P10
Sub1 MIC-XP4L1 Normal
Sub2 NONE Absent
Sub3 NONE Absent
Sub4 NONE Absent
3 CSPEX-1304S Normal SR8800-CMW710-R7951P10
Sub1 MIC-XP4L1 Normal
Sub2 NONE Absent
Sub3 NONE Absent
Sub4 NONE Absent
4 NONE Absent NONE
在聚合子接口2.200下配置qinq终结,提示资源不足
[H3C SR8805-F-Route-Aggregation2.200]vlan-type dot1q vid 3811 to 3863 second-dot1q 1 to 4094
Not enough resources to complete the operation.
qinq占用=物理接口数目*外层tag*内层tag
2*53*4094=433964
实际CSPEX-1304S单板的qinq资源为32W,现场如此配置的确会超过规格,提示资源不足
配置模糊的VLAN终结,内层标签改为any
[H3C SR8805-F-Route-Aggregation2.200]vlan-type dot1q vid 3811 to 3863 second-dot1q any
这个时候占用的资源只有:2*53*1=106,占用的资源大大减少,问题解决。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作