本案例以H3C WA4320-ACN-E产品为例,其他AP产品系列步骤都是相似
方法一、AP瘦切胖配置方法(BootROM菜单下)
提示:升级过程中请勿断电,操作不当断电会引起设备故障,请谨慎操作。
1、先从官方下载WA4320-ACN-E的升级包
https://www.h3c.com/cn/Service/Document_Software/Software_Download/IP_Wlan/AP/H3C_WA4300S/
账号:yx800
密码:01230123
2、使用3CDaemon软件搭建FTP服务(3CDaemon文件压缩包已经上传)
3、用Console线连接设备并启动,显示Ctrl+B时按住Ctrl+B并按回车并进入BootROM菜单
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9):
4、按住Ctrl+F并将设备进行格式化,释放空间
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9):
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y...................
............. Format success.
5、输入“3”,进入以太网子菜单
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9): 3
5、输入“3”,进行修改以太网参数
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
=======================================================================
Enter your choice(0-3): 3
6、选择TFTP、上传的文件名称、server地址(本机地址)、Local地址(随便输入只要是一个网段的即可)
==========================<ETHERNET PARAMETER SET>==========================
|Note: "." = Clear field. |
| "-" = Go to previous field. |
| Ctrl+D = Quit. |
=========================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wa4300s_art.bin
:wa4300s_fat.bin
Target File Name :target
:wa4300s_fat.bin
Server IP Address :192.168.1.254
Local IP Address :192.168.1.2
Gateway IP Address :0.0.0.0
7、输入“2”进行更新主应用程序
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
=======================================================================
Enter your choice(0-3): 2
Loading.........................................................
...................................................................... ..Done!
11293696 bytes downloaded!
Updating File flash:/wa4300s_fat.bin...................................
.........................................................Done!
8、输入“0”,退出以太网子菜单
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
=======================================================================
Enter your choice(0-3): 0
9、输入“0”重启设备即可引导上传的fat程序
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Ctrl+F: Format File System
Enter your choice(0-9): 0
System is starting...
方法二、AP瘦切胖配置方法(命令行模式下)
1、使用3CDaemon软件搭建FTP服务(3CDaemon文件压缩包已经上传)
2、先删除原有的fit版本,释放设备内存空间
<WA4320-ACN-E>delete /unreserved wa4300s_fit.bin
The contents cannot be restored!!! Delete flash:/wa4300s_fit.bin?[Y/N]:y
Deleting a file permanently will take a long time. Please wait... ........
configuration state.................Delete file flash:/wa4300s_fit.bin...Done.
3、给AP配置IP地址,保证能和本机(Server)通信
<WA4320-ACN-E>sys
System View: return to User View with Ctrl+Z.
[WA4320-ACN-E] int vlan1
[WA4320-ACN-E-Vlan-interface1] ip add 192.168.1.2 24
[WA4320-ACN-E-Vlan-interface1] quit
[WA4320-ACN-E] quit
<WA4320-ACN-E>
4、上传fat版本到AP中,并查询保证已经上传到本机
<WA4320-ACN-E>tftp 192.168.1.254 get wa4300s_fat.bin
.
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait.............|
configuration state...................................
TFTP: 11293696 bytes received in 94 second(s)
File downloaded successfully.
<WA4320-ACN-E>dir #查询当前目录下的所有文件
Directory of flash:/
0 -rw- 11293696 Apr 26 2000 12:36:11 wa4300s_fat.bin
15057 KB total (4026 KB free)
<WA4320-ACN-E>
5、指定系统启动文件为“wa4300s_fat.bin”,设备会自动重启并引导“wa4300s_fat.bin”文件
<WA4320-ACN-E>boot-loader file flash:/wa4300s_fat.bin
Verifying boot file ...... This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the boot file at the next reboot on slot 1!
6、进入系统后查询是否引导的是”wa4300s_fat.bin“文件,如果是则已转成胖AP
<WA4320-ACN-E>display boot-loader
The current boot app is: flash:/wa4300s_fat.bin
The app that will boot upon reboot is: flash:/wa4300s_fat.bin
Server IP Address :192.168.1.254
Local IP Address :192.168.1.2
这两个地址互相ping不通是什么原因
(0)
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作