无
S7510E-X插了一个1200W的单电源,满足所有板卡的总功率,但设备上报功率不足。
%Nov 29 15:23:19:295 2021 HIK
DRVPLAT/2/DrvDebug: -MDC=1; Warning: Not enough power to power on board
slot 0. Board power is 450w, system available power is 419w. %Nov 29 15:23:19:295 2021 HIK
DRVPLAT/2/DrvDebug: -MDC=1; Warning: Not enough power to power on board
slot 1. Board power is 450w, system available power is 419w. %Nov 29 15:23:19:296 2021 HIK
DRVPLAT/2/DrvDebug: -MDC=1; Warning: Not enough power to power on board
slot 2. Board power is 450w, system available power is 419w.
[H3C]dis power verbose
System power information:
Power modules installed: 1
Power modules usable: 1
Rated power: 1200 W
Usable power: 1100 W
Used power: 681.0 W
Redundant power: 0 W
Total DC output : 16.2 A
PowerID State InVoltage(V) InPower(W) OutVoltage(V) OutCurrent(A) OutPower(W)
0 Normal -- -- 12.0 16.3 194.6
1 Absent -- -- -- -- --
2 Absent -- -- -- -- --
3 Absent -- -- -- -- --
4 Absent -- -- -- -- --
5 Absent -- -- -- -- --
Power information by slot:
Slot Type Current(A) Power(W) Status
0 None -- -- Faulty
1 None -- -- Faulty
2 None -- -- Faulty
3 None -- -- Absent
4 None -- -- Absent
5 None -- -- Absent
6 None -- -- Absent
7 None -- -- Absent
8 None -- -- Absent
9 None -- -- Absent
10 LSQM1MPU10C0 -- 145.0 Normal
11 None -- 145.0 Absent
12 LSQM1FAB10C0 -- 136.0 Normal
查看功率,已使用功率681W=主控145w+交换网板136w+另一个交换网板预留136w+风扇255w。剩余419w大于任何一个接口板的最大功率。为何单板要以450w启动呢?
经研发确认,
单板刚起来,板卡型号不识别,会以最大功率450w启动,等启动好了功率再回退。
1、增加电源模块
2、研发底层修改参数
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作