uis-cell单网卡部署完成后需要将单网卡改为聚合模式
1、将eth0改为eth0+eth1静态基本/高级聚合模式,这种需要SW侧配置静态链路聚合
root@uis1:~# ovs-vsctl del-port vswitch0 eth0; ovs-vsctl -- add-bond vswitch0 vswitch0_bond eth0 eth1 bond_mode =balance-slb/balance-tcp lacp=off
2、将eth0改为eth0+eth1动态基本/高级聚合模式,这种需要SW侧配置LACP动态链路聚合
root@uis1:~# ovs-vsctl del-port vswitch0 eth0; ovs-vsctl -- add-bond vswitch0 vswitch0_bond eth0 eth1 bond_mode= balance-slb/balance-tcp -- set port vswitch0_bond lacp=active
3、将vswitch0侧的聚合模式切换为静态主备聚合,动态主备不加末端lacp=off:
root@uis1:~#ovs-vsctl set port vswitch0_bond bond_mode=active-backup lacp=off
不涉及
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作