Print

svt380部分虚拟机出现黄色叹号

问题描述

故障描述:HPE SimpliVity 380 Gen10 Node使用正常,但是在vsphere中查看看到有部分虚拟机出现黄色叹号,提示VM Backup Scattered VMDK Failure,目前业务未受到影响,请二线帮查查原因报错截图如下


虚拟机备份是Failed状态


所有虚拟机磁盘文件都在相同的datastore上

解决方法

对于HPE SimpliVity 380 Gen10 Node, VM备份后出现“SimpliVity VM Backup Scattered VMDK Failure”、“SimpliVity Partial VM Backup Detected”,一般与VM的vmdk文件所在位置有关。
相关的KB见附件。与VM相关的所有文件都必须位于同一datastore的同一目录之中, SimpliVity Backup才能正常进行,否则,将出现上述报错。
请帮助用户检查出现警告提示的VM,其VMDK文件是否在同一位置。可在vCenter中查看该VM的硬件信息,检查其所使用的虚拟磁盘设备属于哪个datastore,在datastore中浏览VM对应的目录,其中是否包含了所有虚拟磁盘对应的vmdk文件。解决办法:关于Citrix虚拟化桌面系统向SimpliVity超融合系统进行虚拟机克隆的问题。
HPE无关于Citrix与SimpliVity的兼容性说明文档,HPE工程师使用了VMware Horizon虚拟化桌面系统向SimpliVity超融合系统进行了测试,并基于VMware Horizon虚拟化桌面系统的场景给出了建议。在VMware Horizon虚拟化桌面系统中,如果
文档《HPE Reference Architecture for VMware Horizon on HPE SimpliVity 380 Gen10》链接如下,希望参考VMware Horizon虚拟化桌面系统的架构能有一些帮助。对于Citrix虚拟化桌面系统方面的具体说明,还需要您联系一下其售后支持确认一下
https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=a00053300enw
……
vCenter Server Settings
1. Disable View Storage Accelerator under vCenter Server Storage settings.
2. Set Max concurrent vCenter provisioning operations to 8 under vCenter Server Settings.
3. Do not exceed the default Max concurrent View Composer provisioning operations of 8 under vCenter Server Settings.

Linked Clone Pool Settings
1. View Composer Disks.
1. For Floating linked clones, select Do not redirect disposable files for View Composer Disks.
2. For Dedicated linked clones, retain defaults for View Composer Disks.
2. Retain default Storage Policy Management.
3. When selecting Linked Clone Datastores, create and select one SimpliVity datastore for each system in the datacenter for hosting desktops. A datacenter consisting of four systems should have four datastores selected.
4. Ensure Datastore Storage Overcommit settings are set to Aggressive for each selected datastore.
5. In Advanced Storage Options, disable Use native NFS snapshots (VAAI) VCAI and disable Other Options.
…….

关于vCenter界面出现“Simplivity Battery Backup Health Error”误报警的问题。
误报警“Simplivity Battery Backup Health Error”为已知软件缺陷,代码OMNI-32701,目前各软件版本对此均无提升改善,还需要等待未来发布的版本。对于此误报警,目前暂无禁用方式,还需要手动点击消除该提示。
……
Simplivity Battery Backup Health Error is the reported in the OMNI-32701 as you have confirmed. Customer can acknowledge and reset the alarm to green. However please be informed that vCenter will throw this error every time you reboot the node. Once you reset the error, monitor the unit for 24hrs and if the error is back we will have to look up the ILO to check if there are any genuine hardware errors.

With respect to the Horizon View query, I am still collating the information to share something substantial. Please allow me couple of days to get back with an update.