cisco mds光纤交换机微码升级
1、备份配置
copy startup-config tftp:
2、上传镜像
copy tftp: bootflash:
3、升级微码
install all kickstart bootflash:m9500-sf2ek9-kickstart-mz.6.2.33.bin system bootflash:m9500-sf2ek9-mz.6.2.33.bin
show install all status
4、升级后检查
show version
show module
show envi
show hardware
show flogi database
show sprom backplane 1
开启一个tftp软件作为与光纤交换机上传下载文件的ftp服务端，并设置一个目录用于存放文件，把镜像文件拷贝到这个目录下
1、备份配置：
QY-MDS9506-2# copy startup-config tftp:
Enter destination filename: [QY-MDS9506-2-startup-config]
Enter hostname for the tftp server: 10.0.xx.xxx
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
/
TFTP put operation was successful
Copy complete.
QY-MDS9506-2#
2、上传微码到交换机
QY-MDS9506-2# copy tftp: bootflash:
Enter source filename: m9500-sf2ek9-kickstart-mz.6.2.33.bin
Enter hostname for the tftp server: 10.0.xx.xxx
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
-
TFTP get operation was successful
Copy complete, now saving to disk (please wait)...
QY-MDS9506-2# copy tftp: bootflash:
Enter source filename: m9500-sf2ek9-mz.6.2.33.bin
Enter hostname for the tftp server: 10.0.xx.xxx
Trying to connect to tftp server......
Connection to server Established. Copying Started.....
\
TFTP get operation was successful
Copy complete, now saving to disk (please wait)...
QY-MDS9506-2#
3. 升级微码
QY-MDS9506-2# install all kickstart bootflash:m9500-sf2ek9-kickstart-mz.6.2.33.bin system bootflash:m9500-sf2ek9-mz.6.2.33.bin
Installer will perform compatibility check first. Please wait.
Verifying image bootflash:/m9500-sf2ek9-kickstart-mz.6.2.33.bin for boot variable "kickstart".
[####################] 100% -- SUCCESS
Verifying image bootflash:/m9500-sf2ek9-mz.6.2.33.bin for boot variable "system".
[####################] 100% -- SUCCESS
Performing module support checks.
[####################] 100% -- SUCCESS
Verifying image type.
[####################] 100% -- SUCCESS
Extracting "slc4" version from image bootflash:/m9500-sf2ek9-mz.6.2.33.bin.
[####################] 100% -- SUCCESS
Extracting "bios" version from image bootflash:/m9500-sf2ek9-mz.6.2.33.bin.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/m9500-sf2ek9-mz.6.2.33.bin.
[####################] 100% -- SUCCESS
Extracting "kickstart" version from image bootflash:/m9500-sf2ek9-kickstart-mz.6.2.33.bin.
[####################] 100% -- SUCCESS
Performing Compact Flash and TCAM sanity test.
[####################] 100% -- SUCCESS
Notifying services about system upgrade.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive rolling
2 yes non-disruptive rolling
3 yes non-disruptive rolling
4 yes non-disruptive rolling
5 yes non-disruptive reset
6 yes non-disruptive reset
Images will be upgraded according to following table:
Module Image Running-Version(pri:alt) New-Version Upg-Required
------ ---------- ---------------------------------------- -------------------- ------------
1 slc4 6.2(15) 6.2(33) yes
1 bios v1.10.21(11/26/12):v1.10.21(11/26/12) v1.10.21(11/26/12) no
2 slc4 6.2(15) 6.2(33) yes
2 bios v1.10.21(11/26/12):v1.10.21(11/26/12) v1.10.21(11/26/12) no
3 slc4 6.2(15) 6.2(33) yes
3 bios v1.10.15(-1/23/2010):v1.10.15(-1/23/2010) v1.10.21(11/26/12) yes
4 slc4 6.2(15) 6.2(33) yes
4 bios v1.10.17(04/25/11):v1.10.17(04/25/11) v1.10.21(11/26/12) yes
5 system 6.2(15) 6.2(33) yes
5 kickstart 6.2(15) 6.2(33) yes
5 bios v1.0.10(01/08/09):v1.0.10(01/08/09) v1.0.10(01/08/09) no
6 system 6.2(15) 6.2(33) yes
6 kickstart 6.2(15) 6.2(33) yes
6 bios v1.0.10(01/08/09):v1.0.10(01/08/09) v1.0.10(01/08/09) no
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Performing runtime checks.
[####################] 100% -- SUCCESS
Syncing image bootflash:/m9500-sf2ek9-kickstart-mz.6.2.33.bin to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:/m9500-sf2ek9-mz.6.2.33.bin to standby.
[####################] 100% -- SUCCESS
Setting boot variables.
[####################] 100% -- SUCCESS
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 1: Refreshing compact flash and Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 2: Refreshing compact flash and Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 3: Refreshing compact flash and Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 4: Refreshing compact flash and Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 5: Refreshing compact flash and Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 6: Refreshing compact flash and Upgrading bios/loader/bootrom.
Warning: please do not remove or power off the module at this time.
[####################] 100% -- SUCCESS
Module 6: Waiting for module online.
-- SUCCESS
Notifying services about the switchover.
[####################] 100% -- SUCCESS
"Switching over onto standby".
4、升级后检查
show version
show module
show envi
show hardware
show flogi database
show sprom backplane 1