Print

WA5320瘦转胖(云AP)版本操作步骤说明

2019-08-30发表

组网及说明

不涉及

配置步骤

1、首先升级扩展boot版本,要求boot版本必须为对应版本配套的7.18版本,版本文件中可获取

启动后Ctrl+B进入bootware,选择7进入bootware操作子菜单

****************************************************************************

*                                                                          *

*                   H3C WA5320 BootWare, Version 7.15                      *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2018 New H3C Technologies Co., Ltd.

 

Compiled Date       : Aug 21 2018

CPU Type            : ARM

CPU L1 Cache        : 32KB

CPU L2 Cache        : 256KB

CPU Clock Speed     : 710MHz

Memory Type         : DDR3 SDRAM

Memory Size         : 256MB

Memory Speed        : 533MHz

Flash Size          : 32MB

PCB Version         : Ver.B

 

 

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

 

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

 

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 7

选择4设置更新bootware方式通过网线

===================================================

|Note:the operating device is flash                                        |

|<1> Backup Full BootWare                                                  |

|<2> Restore Full BootWare                                                 |

|<3> Update BootWare By Serial                                             |

|<4> Update BootWare By Ethernet                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 4

 选择4设置上传配置

======================================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 4

 设置上传文件名,此处是更新bootware,需上传boot文件;设置IP地址

====================================================

|Note:       "." = Clear field.                                            |

|            "-" = Go to previous field.                                   |

|         Ctrl+D = Quit.                                                   |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name         :wa5300.ipe

                       :apwa5300_v7.18.btw

Target File Name       :wa5300.ipe

                       :apwa5300_v7.18.btw

Server IP Address      :192.168.0.99 10.0.0.233

Local IP Address       :192.168.0.98 10.0.0.2

Subnet Mask            :255.255.255.0

Gateway IP Address     :0.0.0.0

 

 选择1更新bootware

======================================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 1

Loading...........................Done.

1233920 bytes downloaded!

Updating Basic BootWare? [Y/N]Y

Updating Basic BootWare.....Done.

Updating Extended BootWare? [Y/N]Y

Updating Extended BootWare.........Done.

 更新完成后选择0退回主界面并reboot

======================================

|<1> Update Full BootWare                                                  |

|<2> Update Extended BootWare                                              |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 0

 

===================================================

|Note:the operating device is flash                                        |

|<1> Backup Full BootWare                                                  |

|<2> Restore Full BootWare                                                 |

|<3> Update BootWare By Serial                                             |

|<4> Update BootWare By Ethernet                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 0

 

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 0

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing.................................

.Done.

 重启完成后查看bootwre版本为7.18,再次Ctrl+B进入bootware,Ctrl+F格式化flash,此处注意需要格式化,避免空间不足导致版本解压失败

****************************************************************************

*                                                                          *

*                   H3C WA5320 BootWare, Version 7.18                      *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.

 

Compiled Date       : Mar  8 2019

CPU Type            : ARM

CPU L1 Cache        : 32KB

CPU L2 Cache        : 256KB

CPU Clock Speed     : 710MHz

Memory Type         : DDR3 SDRAM

Memory Size         : 256MB

Memory Speed        : 533MHz

Flash Size          : 32MB

PCB Version         : Ver.B

 

 

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

 

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

 

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9):

Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....

............................................................................

..................

Format success.

 

 格式化完成后选择3进入ethernet子菜单

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 3

 选5设置有线网络配置,上传之前需要把胖AP版本文件名改成wa5300-oasis.ipe

====================================================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|                    |

============================================================================

Enter your choice(0-5): 5

 

====================================================

|Note:       "." = Clear field.                                            |

|            "-" = Go to previous field.                                   |

|         Ctrl+D = Quit.                                                   |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name         :apwa5300_v7.18.btw

                                     :wa5300-oasis.ipe

Target File Name       :apwa5300_v7.18.btw

                                     :wa5300-oasis.ipe

Server IP Address      :10.0.0.233

Local IP Address       :10.0.0.2

Subnet Mask            :255.255.255.0

Gateway IP Address     :0.0.0.0

 

 配置完成后选择2,更新主版本文件

====================================================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|                    |

============================================================================

Enter your choice(0-5): 2

Loading.....................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

............................................................................

..............Done.

27445248 bytes downloaded!

Image file wa5300-oasis-boot.bin is self-decompressing...

Saving file flash:/wa5300-oasis-boot.bin ...................................

.............................Done.

Image file wa5300-oasis-system.bin is self-decompressing...

Saving file flash:/wa5300-oasis-system.bin .................................

............................................................................

............................................................................

............................................................................

............................................................................

...........................Done.

 升级完成后选择0退回主界面并且reboot

====================================================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Update Backup Image File                                              |

|<4> Download Files(*.*)                                                   |

|<5> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|                    |

============================================================================

Enter your choice(0-5): 0

 

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 0

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing.................................

.Done.

 

****************************************************************************

*                                                                          *

*                   H3C WA5320 BootWare, Version 7.18                      *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.

 

Compiled Date       : Mar  8 2019

CPU Type            : ARM

CPU L1 Cache        : 32KB

CPU L2 Cache        : 256KB

CPU Clock Speed     : 710MHz

Memory Type         : DDR3 SDRAM

Memory Size         : 256MB

Memory Speed        : 533MHz

Flash Size          : 32MB

PCB Version         : Ver.B

 

 

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Loading the main image files...

Loading file flash:/wa5300-oasis-system.bin.................................

............................................................................

...........................................................................

Done.

Loading file flash:/wa5300-oasis-boot.bin...................................

Done.

 

Image file flash:/wa5300-oasis-boot.bin is self-decompressing...............

............................................................................

............................................................................

............................................................................

............................................................................

...............................Done.

System image is starting...

 

Startup configuration file doesn"t exist or is invalid.

Line con0 is available.

 

 

Press ENTER to get started. 

至此设备启动完成 


配置关键点

1.需要升级设备bootware版本至7.18

2.升级完bootware后需要格式化Flash

3.对应版本文件需要修改成wa5300-oasis.ipe

APFat AP。初次使用云AP,给云AP上电后,云AP会默认开启4个无线服务:

l  其中一个称之为管理WIFI,也称内部WIFISSIDH3C_XXXXXXXXXXXX为设备mac地址后六位。管理WIFI供商铺内部员工管理使用,一般在2.4G频段工作,当设备未连接到绿洲时,通过连接管理WIFI在浏览器输入10.40.94.1myap.h3c.com访问本地web页面可进行本设备下的无线服务管理配置,一旦连接上绿洲,将只能通过绿洲平台进行统一的无线服务配置管理。

l  其余3个称为用户WIFI,也称商业WIFISSIDH3C_WiFi_1H3C_WiFi_2H3C_WiFi_3,不加密,不认证,不隐藏。当设备连接到外网,可为已经连接上用户WIFI的用户提供上网服务。