Print

NE80/NE40系列路由器链路捆绑功能的配置

2006-09-14发表

NE80/NE40系列路由器链路捆绑功能的配置

 

一、  组网需求:

NE40两台(VRP5.1 0106),RTA8/0/58/0/6分别与以太口的4/1/54/1/6相连,将这两条物理链路捆绑作为一条逻辑链路使用。

二、  组网图:

     

        

 

三、  配置步骤:

RTA配置:

#                                                                              

interface Eth-Trunk0        //创建Trunk接口                                                      

 undo shutdown                                                                 

 ip address 192.168.1.1 255.255.255.0 

#                                                                              

interface Ethernet8/0/5      

 undo shutdown                                                                  

 undo negotiation auto  //接口禁止自协商                                                   

 duplex full        

 eth-trunk 0                       //加入Trunk接口                                                  

#                          

interface Ethernet8/0/6     

 undo shutdown                                                                  

 undo negotiation auto    //接口禁止自协商                                                    

 duplex full                                                                   

 eth-trunk 0                         //加入Trunk接口

RTB配置:

#                                                                              

interface Eth-Trunk0          //创建Trunk接口                                                       

 undo shutdown                                                                 

 ip address 192.168.1.2 255.255.255.0                                                                                                 

#                                                                              

interface Ethernet4/1/5         

 undo negotiation auto   //接口禁止自协商                                                      

 duplex full                  

 undo shutdown                                                                 

 eth-trunk 0                        //加入Trunk接口                                                       

#                                                                              

interface Ethernet4/1/6         

 undo negotiation auto  //接口禁止自协商                                                       

 duplex full             

 undo shutdown                                                                 

 eth-trunk 0                        //加入Trunk接口                                  

# 

四、  配置关键点: