✖
每日一题
☺您本月已连续签到天,打败了0%的知了达人!
今日已答题
签到规则:
1.每日可签到答题一次,每签到一次可获得5积分,连续签到10天额外奖励50积分,连续签到20天以上额外奖励100积分;连续签到30天以上额外奖励200积分;
2.签到答题正确,获得经验值5点;
3.签到成功后,当天日期会有提示。
What's the voice coding packetization length of the mid-range router during VoIP implementation
冷志宇
What’s the relationship between a voice coding/decoding mode and its occupied bandwidth
What’s the maximum length of the telephone cable from the FXS interface of router to the phone set
What shall I do if I cannot disconnect a VoIP call
When using VoIP, the Quidway mid-range-and-low-end routers detect that the telephone can ring but both parties in a call cannot hear each other during the interworking between VRP1.74-0010 and VRP1.74-0105. Why
What voice interfaces are available on the mid-range router at present
Which precautions shall be taken for the interworking between 1.7 and 1.6
Why did I hear a ring back tone instead of the busy tone while calling from a local FXS the voice card on the opposite Router2, which was currently busy?
Why is the tty test-key command not found on the port sometimes
Why is a tilde displayed on the terminal after each command when the dumb terminal runs normally
Why does the configuration fail to be deleted on mid-range routers (V1.74-0105)
Why does the automatic passbook entry machine fail to connect the front-end processor when the bank dumb terminal is accessed
Why does abnormal howler occur to mid-range routers
What to do if the privilege password of low-end routers is forgotten
What to do if the dumb terminal responds slowly or even cannot be enabled after normal operation for a period of time
Which methods can be used to upgrade VRP and BootROM on low-end and mid-range routers
What to do if the big BootROM is lost on the AR46
The network speed is very low on the link, and pinging the remote end on the router incurs serious packet loss. However, the remote end can be pinged through the ping -t 4000 command. Why
What are precautions for remote upgrade of VRP3.3 version on the Quidway R2631E
1
...
639
640
641
642
643
644
795
亲~登录后才可以操作哦!
亲~检测到您登陆的账号未在http://hclhub.h3c.com进行注册
注册后可访问此模块
你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作