wx2510h-pwr怎么开局

终结者注册的好像没有WEB配置：http://www.h3c.com/cn/Service/Document_Software/Document_Center/Home/Wlan/00-Public/Configure/User_Manual/H3C_WCG(R5420)-6W100/

可以看下命令行的配置：

超瘦模式集中转发关键配置

#

[AC] interface vlan-interface 100

[AC-Vlan-interface100] ip address 10.1.9.58 16

# 创建AP模板，选择AP型号并配置序列号。

[AC] wlan ap ap1 model WTU420H

[AC-wlan-ap-ap1] serial-id 219801A0CNC138011454

[AC] wlan ap 1020 model wt1020

[AC-wlan-ap-1020] serial-id DPPMWWB123456

[AC-wlan-ap-1020] wt version 2        //如果是WT1024-X则配置成wt version 3

[AC-wlan-ap-1020] map-configuration cfa0:/1020.txt

创建无线服务模板，并将无线服务模板绑定到AP的Radio接口。

# 配置无线无线服务模板service1，配置SSID为h3c-edu，并使能服务模版。

<AC> system-view

[AC] wlan service-template service1

[AC-wlan-st-service1] ssid h3c-edu

[AC-wlan-st-service1] service-template enable

[AC-wlan-st-service1] quit

# 配置射频，指定工作信道为157。

[AC] wlan ap ap1

[AC-wlan-ap-ap1] radio 1

[AC-wlan-ap-ap1-radio-1] channel 157

# 将无线服务模板service1绑定到Radio 1接口。

[AC-wlan-ap-ap1-radio-1] service-template service1 vlan 3

[AC-wlan-ap-ap1-radio-1] radio enable

#本体map文件  

此处以分体在本体7号口安装为例

system-view

port-isolate group 1             //配置分体有线口端口隔离，防止广播风暴

Vlan 4

interface GigabitEthernet1/0/1                                                 

 port link-type trunk                                                          

 port trunk permit vlan  4

slot 7

 provision model WTU420H   //由于分体必须关联本体才能生成下行接口很多情况下并不能满足，这里使用预配置解决

interface Ethernet1/7/1                                                        

 port access vlan 4

port-isolate enable group 1                                                                                                                                          

interface Ethernet1/7/2                                                        

 port access vlan 4

port-isolate enable group 1                                                                                                                                           

interface Ethernet1/7/3                                                        

 port access vlan 4

port-isolate enable group 1                                                                                                                                           

interface Ethernet1/7/4                                                        

 port access vlan 4

port-isolate enable group 1

#上联交换机配置

interface GigabitEthernet1/0/18                                                

 port link-type trunk                                                          

 port trunk permit vlan  4 100                                                     

 port trunk pvid vlan 100            

5.4 超瘦模式本地转发关键配置

#

[AC] interface vlan-interface 100

[AC-Vlan-interface100] ip address 10.1.9.58 16

# 创建AP模板，选择AP型号并配置序列号。

[AC] wlan ap ap1 model WTU420H

[AC-wlan-ap-ap1] serial-id 219801A0CNC138011454

[AC] wlan ap 1020 model wt1020

[AC-wlan-ap-1020] serial-id DPPMWWB123456

[AC-wlan-ap-1020] wt version 2        //如果是WT1024-X则配置成wt version 3  

[AC-wlan-ap-1020] map-configuration cfa0:/1020.txt

创建无线服务模板，并将无线服务模板绑定到AP的Radio接口。

# 配置无线无线服务模板service1，配置SSID为h3c-edu，并使能服务模版。

<AC> system-view

[AC] wlan service-template service1

[AC-wlan-st-service1] ssid h3c-edu

[AC-wlan-st-service1] client forwarding-location ap

[AC-wlan-st-service1] service-template enable

[AC-wlan-st-service1] quit

# 配置射频，指定工作信道为157。

[AC] wlan ap ap1

[AC-wlan-ap-ap1] radio 1

[AC-wlan-ap-ap1-radio-1] channel 157

# 将无线服务模板service1绑定到Radio 1接口。

[AC-wlan-ap-ap1-radio-1] service-template service1 vlan 3

[AC-wlan-ap-ap1-radio-1] radio enable

#本体map文件

此处以分体在本体5号口安装为例

system-view

port-isolate group 1

Vlan 3 to 4

interface GigabitEthernet1/0/1                                                 

 port link-type trunk                                                          

 port trunk permit vlan  3 4

slot 5

 provision model WTU420H

interface Ethernet1/5/1                                                         

 port access vlan 4

port-isolate enable group 1                                                                                                                                         

interface Ethernet1/5/2                                                        

 port access vlan 4  

port-isolate enable group 1                                                                                                                                       

interface Ethernet1/5/3                                                        

 port access vlan 4      

port-isolate enable group 1                                                                                                                                   

interface Ethernet1/5/4                                                        

 port access vlan 4

port-isolate enable group 1

#上联交换机配置

interface GigabitEthernet1/0/18                                                

 port link-type trunk                                                          

 port trunk permit vlan  3 4 100                                                 

 port trunk pvid vlan 100