version 5.20, Release 2514P12 # sysname H3C # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool 0 network 192.168.1.0 mask 255.255.255.0 gateway-list 192.168.1.1 dns-list 114.114.114.114 8.8.8.8 expired day 5 # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet service-type web # wlan rrm dot11b mandatory-rate 1 2 dot11b supported-rate 5.5 11 dot11g mandatory-rate 1 2 5.5 11 dot11g supported-rate 6 9 12 18 24 36 48 54 # cwmp undo cwmp enable # interface Cellular0/0 async mode protocol link-protocol ppp # interface Dialer1 link-protocol ppp ppp chap user 13431100121079 ppp chap password cipher $c$3$GO/R5M0N7jqHh2P+Jef8K3OxDGQrDlO1pA== ppp pap local-user 13431100121079 password cipher $c$3$FD/K8mIsUTW1qfjPjFQp7LWlLmXeHmifwg== ip address ppp-negotiate dialer user 13431100121079 dialer-group 1 dialer bundle 1 # interface NULL0 # interface Vlan-interface1 ip address 192.168.1.1 255.255.255.0 # interface GigabitEthernet0/0 port link-mode route pppoe-client dial-bundle-number 1 # interface GigabitEthernet0/1 port link-mode route # interface GigabitEthernet0/2 port link-mode bridge # interface GigabitEthernet0/3 port link-mode bridge # interface GigabitEthernet0/4 port link-mode bridge # interface GigabitEthernet0/5 port link-mode bridge # interface GigabitEthernet0/6 port link-mode bridge # interface GigabitEthernet0/7 port link-mode bridge # interface GigabitEthernet0/8 port link-mode bridge # interface GigabitEthernet0/9 port link-mode bridge # interface WLAN-Radio1/0 # ip route-static 0.0.0.0 0.0.0.0 Dialer1 # dhcp server forbidden-ip 192.168.1.1 # dhcp enable # load xml-configuration # load tr069-configuration # user-interface con 0 user-interface tty 13 user-interface vty 0 4 authentication-mode scheme为什么就无法上网呢 之前一直都是好使的 就是中间停电了 就连接不上了
(0)
最佳答案
从路由器上ping公网可以通吗,先看下拨号能不能拨上
(0)
%Jan 1 00:29:01:919 2013 H3C IFNET/3/LINK_UPDOWN: GigabitEthernet0/0 link status is UP. %Jan 1 00:29:01:919 2013 H3C IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface GigabitEthernet0/0 is UP. %Jan 1 00:29:02:549 2013 H3C IFNET/3/LINK_UPDOWN: Dialer1:0 link status is UP. %Jan 1 00:29:05:543 2013 H3C IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface Dialer1:0 is UP. %Jan 1 00:29:05:581 2013 H3C IFNET/5/PROTOCOL_UPDOWN: Protocol PPP IPCP on the interface Dialer1:0 is UP. %Jan 1 00:29:05:581 2013 H3C PPPOEC/6/PPPOEC_LOG_ON: PPPoE user 13431100121079 logged on successfully. ping 不通
您好,请知:
停电后无法连上,以下是排查要点,请参考:
1、检查配置是否丢失,与之前备份的配置核对看下。
2、检查路由是否可达。
3、检查端口的IP是否能获取到。
4、检查NAT地址转换的配置是否还在。
5、看下路由器的软件版本是否最新,可考虑升级到最新。
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
%Jan 1 00:29:01:919 2013 H3C IFNET/3/LINK_UPDOWN: GigabitEthernet0/0 link status is UP. %Jan 1 00:29:01:919 2013 H3C IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface GigabitEthernet0/0 is UP. %Jan 1 00:29:02:549 2013 H3C IFNET/3/LINK_UPDOWN: Dialer1:0 link status is UP. %Jan 1 00:29:05:543 2013 H3C IFNET/5/LINEPROTO_UPDOWN: Line protocol on the interface Dialer1:0 is UP. %Jan 1 00:29:05:581 2013 H3C IFNET/5/PROTOCOL_UPDOWN: Protocol PPP IPCP on the interface Dialer1:0 is UP. %Jan 1 00:29:05:581 2013 H3C PPPOEC/6/PPPOEC_LOG_ON: PPPoE user 13431100121079 logged on successfully. ping 不通