s5560

以下是NQA检测的配置参考命令及解析：

[SW2]nqa agent enable  //启用NQA agent

[SW2]nqa entry weijianing ninglihua  //创建NQA检测

[SW2-nqa-weijianing-ninglihua]type icmp-echo  //模式为ICMP

[SW2-nqa-weijianing-ninglihua-icmp-echo]source int GigabitEthernet 1/0/1  //指定源端口

[SW2-nqa-weijianing-ninglihua-icmp-echo]destination ip 10.0.0.2  //指定目的IP

[SW2-nqa-weijianing-ninglihua-icmp-echo]frequency 100000  //指定检测频率

[SW2-nqa-weijianing-ninglihua-icmp-echo]probe timeout 30

[SW2-nqa-weijianing-ninglihua-icmp-echo]next-hop 10.0.0.2  //指定下一跳地址

[SW2-nqa-weijianing-ninglihua-icmp-echo] history-record enable  //开启历史记录

[SW2-nqa-weijianing-ninglihua-icmp-echo]history-record number 50  //记录的最大条目

[SW2-nqa-weijianing-ninglihua-icmp-echo]probe count 10  

[SW2-nqa-weijianing-ninglihua-icmp-echo]reaction 1 checked-element probe-fail threshold-type consecutive 1 action-type trigger-only  //指定动作

[SW2-nqa-weijianing-ninglihua-icmp-echo]route-option bypass-route

[SW2]track 1 nqa entry weijianing ninglihua reaction 1  //联通track

[SW2]nqa schedule weijianing ninglihua start-time now lifetime forever  //开始检测