聚合绑定mode4 lacp、使用vlan id 打标签隔离的方法
(0)
最佳答案
[H3C]interface bridge-aggregation 1
[H3C-Bridge-Aggregation1] link-aggregation mode dynamic
[H3C-Bridge-Aggregation1] quit
# 分别将端口GigabitEthernet1/0/1至GigabitEthernet1/0/3加入到聚合组1中。
[H3C]interface gigabitethernet 1/0/1
[H3C-GigabitEthernet1/0/1] port link-aggregation group 1
[H3C-GigabitEthernet1/0/1] quit
[H3C]interface gigabitethernet 1/0/2
[H3C-GigabitEthernet1/0/2] port link-aggregation group 1
[H3C-GigabitEthernet1/0/2] quit
[H3C]interface gigabitethernet 1/0/3
[H3C-GigabitEthernet1/0/3] port link-aggregation group 1
[H3C-GigabitEthernet1/0/3] quit
# 配置二层聚合接口1为Trunk端口,并允许VLAN 10和VLAN 20的报文通过。
[H3C]interface bridge-aggregation 1
[H3C-Bridge-Aggregation1] port link-type trunk
[H3C-Bridge-Aggregation1] port trunk permit vlan 10 20
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论