5560-Current state: DOWN

配置gre tunnel之后，物理口是up状态，但是tunnel一直为down，尝试过配置service-loopback group 1 type tunnel，也一直是down

version 7.1.070, Release 3506P12

[H3C]dis cu # version 7.1.070, Release 3506P12 # sysname H3C # irf mac-address persistent timer irf auto-update enable undo irf link-delay irf member 1 priority 1 # service-loopback group 1 type tunnel # lldp global enable # password-recovery enable # vlan 1 # vlan 10 # interface NULL0 # interface Vlan-interface1 ip address 192.168.90.200 255.255.255.0 ip address 192.168.13.200 255.255.255.0 sub pim sm dhcp client identifier ascii 00ecda59573e6b-VLAN0001 # interface Vlan-interface10 ip address 10.10.10.254 255.255.255.0 # interface GigabitEthernet1/0/10 port link-mode bridge # interface Tunnel1 mode gre ip address 6.6.6.5 255.255.255.252 source 192.168.90.200 destination 45.45.10.191 # pim static-rp 10.10.10.254 # # ip route-static 45.0.0.0 8 192.168.13.80 [H3C]dis interface brief Brief information on interfaces in route mode: Link: ADM - administratively down; Stby - standby Protocol: (s) - spoofing Interface Link Protocol Primary IP Description InLoop0 UP UP(s) -- MGE0/0/0 DOWN DOWN -- MGE0/0/1 DOWN DOWN -- NULL0 UP UP(s) -- REG0 UP -- -- Tun1 DOWN DOWN 6.6.6.5 Vlan1 UP UP 192.168.90.200 Vlan10 DOWN DOWN 10.10.10.254 Brief information on interfaces in bridge mode: Link: ADM - administratively down; Stby - standby Speed: (a) - auto Duplex: (a)/A - auto; H - half; F - full Type: A - access; T - trunk; H - hybrid Interface Link Speed Duplex Type PVID Description FGE1/0/29 DOWN auto A A 1 FGE1/0/30 DOWN auto A A 1 GE1/0/1 DOWN auto A A 1 GE1/0/2 DOWN auto A A 1 GE1/0/3 DOWN auto A A 1 GE1/0/4 DOWN auto A A 1 GE1/0/5 DOWN auto A A 1 GE1/0/6 DOWN auto A A 1 GE1/0/7 DOWN auto A A 1 GE1/0/8 DOWN auto A A 1 GE1/0/9 DOWN auto A A 1 GE1/0/10 UP 1G(a) F(a) A 1