System is starting...
Press Ctrl D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing.......................Done!
BootWare Validating...
Press Ctrl B to enter extended boot menu... //如果看到该提示及时按Ctrl B进入botroom菜单

BotWare password: Not required. Please press Enter to Continue.

Password recovery capability is enabled. //如果看到此提示，则表示设备开启了密码恢复功能。

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 6 //选择6 跳过配置文件

Flag Set Success.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 0 //选择0重启设备

System is starting...

Press ENTER to get started.

跳过启动文件后直接保存当前配置，再重启

<H3C>save

The current Configuration will be written to the device. Are you sure? [Y/N]:y

Please input the file name(*.cfg)[flash:/startup.cfg]

(To leave the existing filename unchanged, press the enter key):（输入回车）

flash:/startup.cfg exists, overwrite? [Y/N]:y

Validating file. Please wait...

Configuration is saved to device successfully.

<H3C>reboot

Start to check Configuration with next startup Configuration file, please wait.........DONE!

Current Configuration may be lost after the reboot, save current Configuration? [Y/N]:y

This command will reboot the device. Continue? [Y/N]:y

重启完成后使用默认配置启动，恢复出厂成功

1.2 保留原有配置，只修改密码

本手册适用于如下产品：WAC360、WAC 361、胖AP：WAP712C、WAP722E、WAP722S、WAP722、WAP621

1.2.1 以忽略系统当前配置的方式启动

以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。

详细配置过程：

BotWare password: Not required. Please press Enter to Continue.

Password recovery capability is enabled. //如果看到此提示，则表示设备开启了密码恢复功能。

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 6 //选择6 跳过配置文件

Flag Set Success.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl Z: Access EXTEND-ASSISTANT MENU

Ctrl F: Format File System

Enter your choice(0-9): 0 //选择0重启设备

System is starting...

Press ENTER to get started.

<H3C>dir //查看设备配置文件：startup.cfg

Directory of flash:/

2 -rw- 1666 Apr 26 2000 12:05:39 startup.cfg

29106 KB total (16876 KB free)

给设备和电脑配置成同网段Ip地址，举例：WAC配置成192.168.100.1/24，电脑配置成192.168.100.2/24），在电脑上使用3CDaemon软件搭建TFTP服务器，打开3CDaemon服务器，目录指向电脑E盘，然后点击应用。

<H3C>system

[H3C]interface Vlan-interface 1

[H3C-Vlan-interface1]ip address 192.168.100.1 24

[H3C-Vlan-interface1]quit

[H3C]ping 192.168.100.2

PING 192.168.100.2: 56 data bytes, press CTRL_C to break

Reply from 192.168.100.2: bytes=56 Sequence=1 ttl=128 time=7 ms

//提示设备到电脑网络可达

<H3C>tftp 192.168.100.2 put startup.cfg

//从设备上下载startup.cfg文件到电脑E盘
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait... |
TFTP: 1666 bytes sent in 0 seCond(s).
File uploaded successfully.

下载成功：