HIGH CPU,平时在10%,目前持续在40-50%
在配置了端口镜像后,CPU一切正常,后配置了流镜像,CPU利用率过高
把流镜像配置全部删除后,使用端口镜像,CPU利用率依旧过高
126 33.8% 32.9% 33.7% [RSF0] <<<高占用进程
刷入配置
acl advanced name span-acl-ningdun-DHCP
rule 0 permit ip destination 10.151.6.6 0
rule 5 permit ip destination 10.151.6.7 0
rule 10 permit ip destination 10.151.6.9 0
#
traffic classifier monitor_1
if-match acl name span-acl-ningdun-DHCP
#
traffic behavior monitor_1
mirror-to interface ten-gigabitethernet 1/0/16
#
traffic classifier monitor_2
if-match acl name span-acl-ningdun-DHCP
#
traffic behavior monitor_2
mirror-to interface ten-gigabitethernet 2/0/16
#
qos policy monitor_1-2
classifier monitor_1 behavior monitor_1
#
interface ten-gigabitethernet 1/0/15
qos apply policy monitor_1-2 inbound
#
interface ten-gigabitethernet 2/0/19
qos apply policy monitor_1-2 inbound
#
no mirroring-group 1
#
interface Ten-GigabitEthernet1/0/15
no mirroring-group 1 mirroring-port
#
interface Ten-GigabitEthernet1/0/16
no mirroring-group 1 monitor-port
还原配置
#
interface ten-gigabitethernet 1/0/15
no qos apply policy monitor_1-2 inbound
#
interface ten-gigabitethernet 2/0/19
no qos apply policy monitor_1-2 inbound
#
mirroring-group 1 local
#
interface Ten-GigabitEthernet1/0/15
mirroring-group 1 mirroring-port both
#
interface Ten-GigabitEthernet1/0/16
mirroring-group 1 monitor-port
#
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论