在模拟器上做实验防火墙堆叠,然后做一个BFD检查,没断开端口的时候状态为down,端口了BFD端口端口还是为down?这是咋回事?
[H3C]dis bfd session Total Session Num: 1 Up Session Num: 0 Init Mode: Active IPv4 Session Working Under Ctrl Mode:
LD/RD SourceAddr DestAddr State Holdtime Interface
97/0 192.168.1.1 192.168.1.2 Down 0ms RAGG5 [H3C]
interface Route-Aggregation5
mad bfd enable
mad ip address 192.168.1.1 255.255.255.0 member 1
mad ip address 192.168.1.2 255.255.255.0 member 2
#
interface GigabitEthernet1/0/2
port link-mode route
combo enable copper
port link-aggregation group 5
#
interface GigabitEthernet2/0/2
port link-mode route
combo enable copper
port link-aggregation group 5
#
(0)
最佳答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论