在防火墙secpath f1030上设置了带宽管理,希望限制外部终端通过1接口的172.16.1.251设备访问服务器172.16.1.224的下载速率为30Mbps,但是配置带宽策略未命中,下载仍然占用了大部分带宽,造成其他业务卡顿。
相关配置摘录在附件中。
(0)
object-group ip address sdk
security-zone Trust
0 network host address 172.16.1.254
10 network subnet 172.16.1.0 255.255.255.0
20 network host address 172.16.1.251
#
object-group ip address zsp
0 network subnet 172.16.5.0 255.255.255.0
#
interface GigabitEthernet1/0/1
port link-mode route
ip address 172.16.1.254 255.255.255.0
#
interface GigabitEthernet1/0/3
port link-mode route
bandwidth 30000
ip address 222.71.xxx.xxx 255.255.255.248
nat outbound
nat server protocol tcp global 222.71.xxx.xxx 441 inside 172.16.1.251 441 rule atrust:441
nat server protocol tcp global 222.71.xxx.xxx 33443 inside 172.16.1.251 33443 rule atrust1.251:33443 counting
gateway 222.71.248.161
#
interface GigabitEthernet1/0/17
port link-mode route
description to zsp 5.253
ip address 172.16.5.254 255.255.255.0
#
security-zone name Trust
import interface GigabitEthernet1/0/1
import interface GigabitEthernet1/0/17
#
security-zone name Untrust
import interface GigabitEthernet1/0/3
#
traffic-policy
rule 1 name zsp
action qos profile zsp
source-address address-set zsp
source-zone Trust
destination-zone Untrust
rule 2 name sdk
action qos profile sdk
source-address address-set sdk
source-zone Trust
destination-zone Untrust
profile name sdk
bandwidth downstream maximum 30000
bandwidth upstream maximum 30000
bandwidth average enable
profile name zsp
bandwidth downstream guaranteed 60000
bandwidth upstream guaranteed 60000
#
security-policy ip
rule 2 name 172.16.2.0(deny)
counting enable
source-zone Trust
destination-zone Untrust
source-ip 172.16.2.0
rule 0 name trust-untrust
action pass
logging enable
counting enable
profile 0_IPv4
source-zone Untrust
source-zone Trust
destination-zone Trust
destination-zone Untrust
rule 1 name local-any
action pass
counting enable
profile 1_IPv4
source-zone Trust
source-zone Local
source-zone Untrust
destination-zone Local
destination-zone Trust
destination-zone Untrust
#
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
在“组网及组网描述”里上传了相关配置,怎么看不到?