以下为锐捷设备的配置命令，对应H3C的命令如何，请以V7配置命令为例回答

interface GigabitEthernet 5/24

 no switchport

 duplex full

 speed 1000

 medium-type fiber

 ip ospf network point-to-point

 ip ospf cost 10

 no ip proxy-arp

 ip address 172.31.1.34 255.255.255.252

 label-switching

 mpls ip

router bgp 65500

 bgp router-id 172.31.255.111

 bgp log-neighbor-changes

 neighbor 172.31.255.1 remote-as 65500

 neighbor 172.31.255.1 update-source Loopback 0

 neighbor 172.31.255.2 remote-as 65500

 neighbor 172.31.255.2 update-source Loopback 0

 !

 address-family ipv4

 maximum-prefix 10000

 redistribute connected

 redistribute static

 no neighbor 172.31.255.1 activate

 no neighbor 172.31.255.2 activate

 exit-address-family

 !

 address-family vpnv4 unicast

 neighbor 172.31.255.1 activate

 neighbor 172.31.255.1 send-community extended

 neighbor 172.31.255.2 activate

 neighbor 172.31.255.2 send-community extended

 exit-address-family

 address-family ipv4 vrf KFQ_SERVER

 maximum-prefix 10000

 redistribute connected

 redistribute ospf 1001 match internal external 2

 exit-address-family

 !

router ospf 1

 router-id 172.31.255.111

 network 172.31.1.32 0.0.0.3 area 0

 network 172.31.1.76 0.0.0.3 area 0

 network 172.31.111.0 0.0.0.255 area 0

 network 172.31.211.0 0.0.0.255 area 0

 network 172.31.255.111 0.0.0.0 area 0

!

!

router ospf 1000 vrf KFQ_ALL

 redistribute bgp subnets

 network 10.89.255.0 0.0.0.7 area 0

 default-information originate

!

router ospf 1001 vrf KFQ_SERVER

 redistribute bgp subnets

 network 10.89.254.0 0.0.0.7 area 0

 default-information originate

!