S6520X-54QC-EI+聚合口BAGG1024的成员端口XGE1/0/45更改为非活动状态
- 0关注
- 0收藏，564浏览
问题描述：
有一个聚合口突然变为非活动状态,请帮忙分析原因
%Sep 16 09:54:36:106 2023 CN-HZ-9FMDC-A10-IDC-CSW LAGG/6/LAGG_INACTIVE_OPERSTATE: Member port XGE1/0/45 of aggregation group BAGG1024 changed to the inactive state, because the peer port did not have the Synchronization flag.
%Sep 16 09:54:36:144 2023 CN-HZ-9FMDC-A10-IDC-CSW LAGG/6/LAGG_ACTIVE: Member port XGE1/0/45 of aggregation group BAGG1024 changed to the active state.
%Sep 16 10:09:28:460 2023 CN-HZ-9FMDC-A10-IDC-CSW LAGG/6/LAGG_INACTIVE_OPERSTATE: Member port XGE1/0/45 of aggregation group BAGG1024 changed to the inactive state, because the peer port did not have the Synchronization flag.
%Sep 16 10:09:28:511 2023 CN-HZ-9FMDC-A10-IDC-CSW LAGG/6/LAGG_ACTIVE: Member port XGE1/0/45 of aggregation group BAGG1024 changed to the active state.
%Sep 16 11:18:51:320 2023 CN-HZ-9FMDC-A10-IDC-CSW LAGG/6/LAGG_INACTIVE_OPERSTATE: Member port XGE1/0/45 of aggregation group BAGG1024 changed to the inactive state, because the peer port did not have the Synchronization flag.
%Sep 16 11:18:51:360 2023 CN-HZ-9FMDC-A10-IDC-CSW LAGG/6/LAGG_ACTIVE: Member port XGE1/0/45 of aggregation group BAGG1024 changed to the active state.
%Sep 16 11:26:04:829 2023 CN-HZ-9FMDC-A10-IDC-CSW LAGG/6/LAGG_INACTIVE_OPERSTATE: Member port XGE1/0/45 of aggregation group BAGG1024 changed to the inactive state, because the peer port did not have the Synchronization flag.
组网及组网描述：
DEVICE_NAME : S6520X-54QC-EI
DEVICE_SERIAL_NUMBER : 210235A2CJH2270C008D
2台 S6520X-54QC-EI进行堆叠,再通过端口聚合连接到华为的2台S12700E-8
- 2023-09-18提问
- 举报
-
(0)
最佳答案
检查下接口的收发光强度
- 2023-09-18回答
- 评论(1)
- 举报
-
(0)
Ten-GigabitEthernet2/0/45 transceiver diagnostic information: Current diagnostic parameters: Temp.(C) Voltage(V) Bias(mA) RX power(dBm) TX power(dBm) 29 3.32 7.57 -2.63 -2.39 Alarm thresholds: Temp.(C) Voltage(V) Bias(mA) RX power(dBm) TX power(dBm) High 73 3.80 13.20 1.00 0.00 Low -3 2.81 1.00 -9.50 -10.30
Ten-GigabitEthernet2/0/45 transceiver diagnostic information: Current diagnostic parameters: Temp.(C) Voltage(V) Bias(mA) RX power(dBm) TX power(dBm) 29 3.32 7.57 -2.63 -2.39 Alarm thresholds: Temp.(C) Voltage(V) Bias(mA) RX power(dBm) TX power(dBm) High 73 3.80 13.20 1.00 0.00 Low -3 2.81 1.00 -9.50 -10.30
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
命令是哪个?