云ap转廋ap
- 0关注
- 1收藏，386浏览
问题描述：
怎么通过AC(WX2520X-LI)去把云ap（WA6320-C）转成廋ap
组网及组网描述：
ac旁挂核心，POE交换机连核心
- 2024-07-07提问
- 举报
-
(0)
只能登陆到AP上面切换
3、console口操作，console口登录方法参考《1.03 设备管理-Console登录方法》
在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分。
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 此处按键 Ctrl+F，作用：格式化flash
Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y //输入Y
...........................................................................................................................
Format success.
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): //按键Ctrl+Y，设置ap胖模式或者瘦模式
Please select the new mode
Current mode is Fat //提示当前是fat瘦模式
===================================================================
|NO. Mode |
|1 Fat Mode |
|2 Fit Mode |
|0 Exit |
===================================================================
Enter your choice(0-2):2 //输入2，即fit瘦模式
Changed to fit mode successfully! //修改成fit瘦模式成功
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 3 //进入以太口子菜单
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 5 //修改以太口参数
==========================<ETHERNET PARAMETER SET>==============
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
===================================================================
Protocol (FTP or TFTP) :ftp TFTP
//忽略输出内容，直接输入TFTP，然后回车
Load File Name : wa5300.ipe
//忽略输出内容，直接输入wa5300.ipe，然后回车
Target File Name : wa5300.ipe
//忽略输出内容，直接输入wa5300.ipe，然后回车
Server IP Address :192.168.0.1
//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车
Local IP Address :192.168.0.50
//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车
Gateway IP Address :0.0.0.0
//忽略输出内容，直接回车
备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 2 //输入2，更新版本
Loading.................................................................................................................................Done.
18165760 bytes downloaded!
Image file wa5300-boot.bin is self-decompressing...
Saving file flash:/wa5300-boot.bin .............Done.
Image file wa5300-system.bin is self-decompressing...
Saving file flash:/wa5300-system.bin .......................................
Done.
==========================<Enter Ethernet SubMenu>====================
|Note:the operating device is flash |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
===================================================================
Enter your choice(0-5): 0 //输入0返回
==========================<EXTENDED-BOOTWARE MENU>=============
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
===================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Ctrl+Y: Change AP Mode
Enter your choice(0-9): 0 //输入0，重启AP
System is starting...
设备启动完成
Press ENTER to get started.
<H3C> //升级成功
%Dec 15 18:56:54:395 2017 H3C SHELL/5/SHELL_LOGIN: Console logged in from con0.
建议与总结：
先Ctrl+F格式化flash，再Ctrl+Y选择胖模式，最后加载fit版本。
- 2024-07-07回答
- 评论(2)
- 举报
-
(0)
https://www.h3c.com/cn/d_202207/1645404_30005_40.htm#_Toc72757941
参考连接
- 2024-07-07回答
- 评论(4)
- 举报
-
(0)
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
telnet到AP上面，密码是h3capadmin ，输入<H3C>ap-mode fit