T300M-X连接到wtu430-IOT上，在AC上如何配置上线？

根据配置指导：

[AC] wlan ap 1f-1

[AC-wlan-ap-1f-1] poe port 3 enable

配置T300模块上线

# 在任意Module视图下绑定T300模块的序列号，每个Module视图仅能绑定一个T300模块。

[AC-wlan-ap-1f-1] module 1

[AC-wlan-ap-1f-1-module-1] serial-number 219801A19A8173E33506

在配置到此步骤时，没有绑定T300模块的命令serial-number。

[wlan-ac-wlan-ap-wtu1-module-1]?
Wlan-ap-module view commands:
  diagnostic-logfile  Diagnostic log file configuration
  display             Display current system information
  end                 Alias for 'return'
  exit                Alias for 'quit'
  lock                Lock the current line
  logfile             Log file configuration
  module              Module management
  monitor             System monitor
  no                  Alias for 'undo'
  ping                Ping function
  quit                Exit from current command view
  repeat              Repeat executing history commands
  reset               Reset operation
  return              Exit to User View
  rfid-tracking       Wireless location feature
  save                Save current configuration
  security-logfile    Security log file configuration
  show                Alias for 'display'
  tracert             Tracert function
  tx-power            Specify a transmit power
  type                Specify the Module type
  undo                Cancel current setting
  wlan                WLAN configuration
  write               Alias for 'save'

[wlan-ac-wlan-ap-wtu1-module-1]

请问怎么处理？

组网方式：WX5540H----WT1024-X-HI---WTU430-IOT---T300M-X---T300-X

WX5540H版本：Release 5221