交换机配置OSPF问题

ospf 500 router-id 132.127.147.237

 import-route direct

 import-route static

 import-route bgp 240 cost 1

 area 0.0.0.0

  network 132.97.253.25 0.0.0.0

  network 132.97.253.29 0.0.0.0

 area 0.0.0.12

  network 130.51.12.254 0.0.0.0

  network 130.51.18.217 0.0.0.0

  network 132.127.147.237 0.0.0.0

配置如上

<S12508_XSK_OCS_1&2>display ospf

OSPF Process 500 with Router ID 132.127.147.237

                 OSPF Protocol Information

 RouterID: 132.127.147.237  Router type:  ABR  ASBR 

 Route tag: 0 

 Multi-VPN-Instance is not enabled

 Ext-community type: Domain ID 0x5, Route Type 0x306, Router ID 0x107

 Domain ID: 0.0.0.0

 Opaque capable 

 Isolation: Disabled

 ISPF is enabled 

 SPF-schedule-interval: 5 50 200

 LSA generation interval: 5 50 200

 LSA arrival interval: 1000

 Transmit pacing: Interval: 20 Count: 3

 Default ASE parameters: Metric: 1 Tag: 1 Type: 2

 Route preference: 10

 ASE route preference: 150

 SPF calculation count: 1425 

 RFC 1583 compatible

 Graceful restart interval: 120

 SNMP trap rate limit interval: 10  Count: 7

 Area count: 2   NSSA area count: 0 

 ExChange/Loading neighbors: 0

 Area: 0.0.0.0          (MPLS TE  not enabled)

 Authentication type: None    Area flag: Normal

 SPF scheduled count: 8    

 ExChange/Loading neighbors: 0

 Interface: 132.97.253.29 (Route-Aggregation1) --> 132.97.253.30

 Cost: 1       State: P-2-P     Type: PTP       MTU: 1500  

 Cost source: Default  

 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1

 FRR backup: Enabled 

 Enabled by network configuration

 Interface: 132.97.253.25 (Route-Aggregation2) --> 132.97.253.26

 Cost: 1       State: P-2-P     Type: PTP       MTU: 1500  

 Cost source: Default  

 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1

 FRR backup: Enabled 

 Enabled by network configuration

 Area: 0.0.0.12         (MPLS TE  not enabled)

 Authentication type: None    Area flag: Normal

 SPF scheduled count: 37   

 ExChange/Loading neighbors: 0

 Interface: 130.51.12.254 (Vlan-interface12)

 Cost: 1       State: DR        Type: Broadcast    MTU: 1500  

 Cost source: Default  

 Priority: 1

 Designated router: 130.51.12.254

 Backup designated router: 130.51.12.252

 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1

 FRR backup: Enabled 

 Enabled by network configuration

 Interface: 130.51.18.217 (Vlan-interface20)

 Cost: 1       State: DR        Type: Broadcast    MTU: 1500  

 Cost source: Default  

 Priority: 1

 Designated router: 130.51.18.217

 Backup designated router: 0.0.0.0

 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1

 FRR backup: Enabled 

 Enabled by network configuration

display ospf的回显信息如上， Interface: 130.51.12.254 (Vlan-interface12)与 Interface: 130.51.18.217 (Vlan-interface20)后面没有-->x.x.x.x。。。是不是代表虽然network了，但是没有建立邻居？