如何查看当前端口的FEC状态,进入端口配置也没fec相关操作命令
[H3C]display interface HundredGigE 2/0/54
HundredGigE2/0/54
Current state: UP
Line protocol state: UP
IP packet frame type: Ethernet II, hardware address: 6893-20b5-c3cb
Description: HundredGigE2/0/54 Interface
Bandwidth: 100000000 kbps
Loopback is not set
Media type is optical fiber, port hardware type is 100G_BASE_SR4_QSFP28
100Gbps-speed mode, full-duplex mode
Link speed type is autonegotiation, link duplex type is autonegotiation
Flow-control is not enabled
Maximum frame length: 10000
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
PVID: 1
MDI type: Automdix
Port link-type: Access
Tagged VLANs: None
Untagged VLANs: 1
Port priority: 0
Last link flapping: 0 hours 0 minutes 43 seconds
Last clearing of counters: Never
Peak input rate: 15 bytes/sec, at 2071-07-03 10:17:31
Peak output rate: 75 bytes/sec, at 2071-07-02 17:03:33
Last 300 second input: 0 packets/sec 0 bytes/sec 0%
Last 300 second output: 0 packets/sec 13 bytes/sec 0%
Input (total): 121 packets, 10500 bytes
69 unicasts, 35 broadcasts, 17 multicasts, 0 pauses
Input (normal): 121 packets, - bytes
69 unicasts, 35 broadcasts, 17 multicasts, 0 pauses
(0)
最佳答案
默认是auto的
FEC(Forward Error Correction,前向纠错)用于报文纠错,它通过在发送端为数据报文附加纠错信息,在接收端利用纠错信息来纠正数据报文在传输时产生的错误码,以提高传输质量。用户需要根据实际情况来选择FEC模式。
本系列交换机100GE和25GE以太网接口支持FEC功能,仅25GE以太网接口工作在25Gbps速率时支持通过命令行配置本功能。
用户需要保证链路两端使用的FEC模式一致。
(1) 进入系统视图。
system-view
(2) 进入以太网接口视图。
interface interface-type interface-number
(3) 配置接口的FEC模式。
port fec mode { auto | base-r | none | rs-fec }
缺省情况下,接口的FEC模式处于自协商模式。
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
麻烦采纳