h3c msr2660xs没有web流量监控，已经升级到最新款

我的需求是监听192.168.8.x到192.168.9.255设备ip的流量，可惜没有找到设置，命令行工具也没有，希望大佬指点

[H3C-acl-ipv4-adv-3333]

[H3C-acl-ipv4-adv-3333]interface Dialer0

[H3C-Dialer0]traffic-filter inbound acl 3333

             ^

 % Unrecognized command found at '^' position.

[H3C-Dialer0]packet-filter inbound ip-group 3333

                           ^

 % Wrong parameter found at '^' position.

[H3C-Dialer0]packet-filter inbound ip-group 3333

                           ^

 % Wrong parameter found at '^' position.

[H3C-Dialer0]

[H3C-Dialer0]display interface Dialer0

Dialer0

Current state: UP

Line protocol state: UP

Description: Dialer0 Interface

Bandwidth: 1000000 kbps

Maximum transmission unit: 1492

Hold timer: 10 seconds, retry times: 5

Internet address: 100.64.148.115/32 (PPP-negotiated)

Link layer protocol: PPP

LCP: initial

Physical: Dialer, baudrate: 1000000 kbps

Output queue - Urgent queuing: Size/Length/Discards 0/1024/0

Output queue - Protocol queuing: Size/Length/Discards 0/500/0

Output queue - FIFO queuing: Size/Length/Discards 0/75/0

Last clearing of counters: Never

Last 300 seconds input rate: 5991894 bytes/sec, 47935152 bits/sec, 4939 packets/sec

Last 300 seconds output rate: 464680 bytes/sec, 3717440 bits/sec, 2245 packets/sec

Input: 156450572 packets, 184167440292 bytes, 0 drops

Output: 70734124 packets, 16630931568 bytes, 216427 drops

[H3C-Dialer0]

[H3C-Dialer0]display acl 3333

Advanced IPv4 ACL 3333, 1 rule,

ACL's step is 5, start ID is 5

 rule 5 permit ip source 192.168.8.0 0.0.1.255

[H3C-Dialer0]traffic-filter inbound acl 3333