过保 S6850-56HF 219801A34C6238V0009D

[H3C]display transceiver interface Twenty-FiveGigE 1/0/1
Twenty-FiveGigE1/0/1 transceiver information:
Transceiver Type : 25G_STACK_SFP28
Connector Type : No Separable Connector
Wavelength(nm) : N/A
Transfer Distance(m) : 5(No Separable Connector)
Digital Diagnostic Monitoring : NO
Vendor Name : OEM
Vendor Part Number : SFP-25G-CU5M



[H3C]display transceiver diagnosis interface Twenty-FiveGigE 1/0/1
The transceiver does not support this function.
[H3C]display transceiver alarm interface Twenty-FiveGigE 1/0/1
Twenty-FiveGigE1/0/1 transceiver current alarm information:
None
[H3C]display transceiver manuinfo interface Twenty-FiveGigE 1/0/1
The transceiver does not support this function.

<H3C>display logbuffer level 2
Log buffer: Enabled
Max buffer size: 65535
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 82
Current messages: 512
%Jan 3 03:46:06:654 2015 H3C OPTMOD/2/OPTICAL_ALARM_OCCUR: -Slot=2; Transceiver alarm occurred. (PhysicalIndex=525, PhysicalName=Twenty-FiveGigE2/0/35, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE2/0/35), ErrorCode=600022, Reason=Transceiver does not match the port configuration.)
%Jan 3 03:46:06:654 2015 H3C OPTMOD/2/OPTICAL_ALARM_OCCUR: -Slot=2; Transceiver alarm occurred. (PhysicalIndex=526, PhysicalName=Twenty-FiveGigE2/0/36, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE2/0/36), ErrorCode=600022, Reason=Transceiver does not match the port configuration.)
%Jan 3 03:46:06:654 2015 H3C OPTMOD/2/OPTICAL_ALARM_OCCUR: -Slot=2; Transceiver alarm occurred. (PhysicalIndex=523, PhysicalName=Twenty-FiveGigE2/0/33, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE2/0/33), ErrorCode=600022, Reason=Transceiver does not match the port configuration.)
%Jan 3 03:46:06:655 2015 H3C OPTMOD/2/OPTICAL_ALARM_OCCUR: -Slot=2; Transceiver alarm occurred. (PhysicalIndex=524, PhysicalName=Twenty-FiveGigE2/0/34, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE2/0/34), ErrorCode=600022, Reason=Transceiver does not match the port configuration.)
%Jan 3 03:47:08:523 2015 H3C DEV/2/INTERNALLINK_ALARM_OCCUR: Internal link alarm occurred. (PhysicalIndex=14, PhysicalName=Board, RelativeResource=WGE1/0/36, ErrorCode=482001, Reason= Remote fault error. on port WGE1/0/36)
%Jan 3 03:47:40:675 2015 H3C OPTMOD/2/OPTICAL_ALARM_CLEAR: Transceiver alarm cleared. (PhysicalIndex=126, PhysicalName=Twenty-FiveGigE1/0/36, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE1/0/36), ErrorCode=600022, Reason=Transceiver matches the port configuration.)
%Jan 3 03:47:40:676 2015 H3C OPTMOD/2/OPTICAL_ALARM_CLEAR: Transceiver alarm cleared. (PhysicalIndex=127, PhysicalName=Twenty-FiveGigE1/0/37, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE1/0/37), ErrorCode=600022, Reason=Transceiver matches the port configuration.)
%Jan 3 03:47:40:676 2015 H3C OPTMOD/2/OPTICAL_ALARM_CLEAR: Transceiver alarm cleared. (PhysicalIndex=128, PhysicalName=Twenty-FiveGigE1/0/38, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE1/0/38), ErrorCode=600022, Reason=Transceiver matches the port configuration.)
%Jan 3 04:05:40:067 2015 H3C DEV/2/INTERNALLINK_ALARM_CLEAR: Internal link alarm cleared. (PhysicalIndex=14, PhysicalName=Board, RelativeResource=WGE1/0/36, ErrorCode=482001, Reason= Recovered from remote fault. on port WGE1/0/36)
%Jan 3 04:05:51:724 2015 H3C DEV/2/INTERNALLINK_ALARM_OCCUR: Internal link alarm occurred. (PhysicalIndex=14, PhysicalName=Board, RelativeResource=WGE1/0/36, ErrorCode=482001, Reason= Remote fault error. on port WGE1/0/36)
%Jan 3 04:05:52:687 2015 H3C DEV/2/INTERNALLINK_ALARM_OCCUR: Internal link alarm occurred. (PhysicalIndex=14, PhysicalName=Board, RelativeResource=WGE1/0/55, ErrorCode=482001, Reason= Remote fault error. on port WGE1/0/55)
%Jan 3 04:06:11:747 2015 H3C DEV/2/INTERNALLINK_ALARM_CLEAR: Internal link alarm cleared. (PhysicalIndex=14, PhysicalName=Board, RelativeResource=WGE1/0/36, ErrorCode=482001, Reason= Recovered from remote fault. on port WGE1/0/36)
%Jan 3 04:06:13:137 2015 H3C DEV/2/INTERNALLINK_ALARM_CLEAR: Internal link alarm cleared. (PhysicalIndex=14, PhysicalName=Board, RelativeResource=WGE1/0/55, ErrorCode=482001, Reason= Recovered from remote fault. on port WGE1/0/55)
%Jan 3 04:06:57:047 2015 H3C OPTMOD/2/OPTICAL_ALARM_OCCUR: Transceiver alarm occurred. (PhysicalIndex=126, PhysicalName=Twenty-FiveGigE1/0/36, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE1/0/36), ErrorCode=600022, Reason=Transceiver does not match the port configuration.)
%Jan 3 04:06:57:047 2015 H3C OPTMOD/2/OPTICAL_ALARM_OCCUR: Transceiver alarm occurred. (PhysicalIndex=127, PhysicalName=Twenty-FiveGigE1/0/37, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE1/0/37), ErrorCode=600022, Reason=Transceiver does not match the port configuration.)
%Jan 3 04:06:57:047 2015 H3C OPTMOD/2/OPTICAL_ALARM_OCCUR: Transceiver alarm occurred. (PhysicalIndex=128, PhysicalName=Twenty-FiveGigE1/0/38, RelativeResource=(transceivertype:25G_STACK_SFP28,interface:WGE1/0/38), ErrorCode=600022, Reason=Transceiver does not match the port configuration.)

[H3C]display transceiver interface Twenty-FiveGigE 1/0/35
Twenty-FiveGigE1/0/35 transceiver information:
Transceiver Type : 25G_STACK_SFP28
Connector Type : No Separable Connector
Wavelength(nm) : N/A
Transfer Distance(m) : 3(No Separable Connector)
Digital Diagnostic Monitoring : NO
Vendor Name : LENV-Amphenol
Vendor Part Number : 0000000YD296
[H3C]display transceiver diagnosis interface Twenty-FiveGigE 1/0/35
The transceiver does not support this function.
[H3C]display transceiver alarm interface Twenty-FiveGigE 1/0/35
Twenty-FiveGigE1/0/35 transceiver current alarm information:
None
[H3C]display transceiver manuinfo interface Twenty-FiveGigE 1/0/35
The transceiver does not support this function.