交换机忘记密码 进入boot模式后选择恢复出厂设置回车键后提示ctr1+F: Format file system ctri+e: ACCESS EXTENDED ASSISTANT MENU ctr]+p: change authentication for console login ctr1+c: Display CopyFight ctr]+R: Download image to SDRAM and run Enter your choice(0-9): 5 password recovery capability is enabled. To perform this operation, first disable the password recovery capability using the undo password-recovery enable command in CLI. EXTENDED BOOT MENU 1. Download image to flash 2. Select image to boot 3. Display_ali fiies in flash 4. Delete file from flash 5. Restore to factory default configuration 6. Enter BootRom upgrade menu 7. skip current sysfem configuration 8. Set switch startup mode 9. set The operating'Device 0. Reboot ctr]+z: Access EXTENDED ASSISTANT MENU ctr]+F: Format file system ctri+p: change authentication for console login ctr]+R: Downoad image to SDRam and run ctr1+c: Display copyright enter your choice(O-9): 该怎么解决
(0)
#华三官网下载所需要的升级版本,本案例以S5130-EI为例。如若是其他型号,根据具体的型号下载对应版本。
点击同意,下载即可。
#将下载的压缩包解压成文件夹,能够看到两个文件,我们需要使用的是ipe后缀的文件。
#在3CDaemon利用TFTP上传所要升级的版本文件夹
上传、下载目录选择文件夹S5130EI_E-CMW710-R3208P10
#断电重启交换机,当出现Press Ctrl-B to enter Extended Boot menu...3时,迅速按Ctrl+B(也可以开机启动的时候一直按着ctrl+B),进入bootware菜单后,提示输入密码。密码默认为空,直接回车即可,然后显示如下界面:
#输入1,回车
#输入1,回车
Load File Name :S5130EI_E-CMW710-R3208P10.ipe
Server IP Address :192.168.10.1
Local IP Address :192.168.10.2
Subnet Mask :255.255.255.0
Gateway IP Address :0.0.0.0
#打开3CDaemon,可以看到数据正在传输,当显示如下界面时,数据传输完毕
#当命令行界面出现Please input the file attribute (Main/Backup/None)时,输入main,回车
#输入0,重启交换机。查看结果,升级完毕
<H3C>dis version
H3C Comware Software, Version 7.1.070, Release 3208P10
Copyright (c) 2004-2018 New H3C Technologies Co., Ltd. All rights reserved.
H3C S5130-28S-PWR-EI uptime is 0 week, 0 days, 0 hours, 5 minutes
Last reboot reason : User reboot
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论