ALARM:Power 1 Get Fan airflow direction Failed on slot 1 ,please check it.
日志提示这个,具体是什么原因造成的呢,风扇模块重新插拔了,但还是报错
(0)
最佳答案
参考:
设备正常运行,但是一致有日志告警:ALARM:Power 2 Get Fan airflow direction Failed on slot 1 ,please check it.
类似情况:The airflow direction of The two Power Fan is Different on slot 1 ,please check it
查看到有相关的风扇的告警,先调整下风扇风向保持和期望风向一致,修改后问题依旧
查看设备的信息第二个电源模块无显示,但是设备的电源是Normal
===============display device manuinfo===============
Power 2: Failed to display the manufacture information of the specified power.
===============display power===============
Slot 1:
PowerID State Mode Current(A) Voltage(V) Power(W)
1 Normal AC -- -- --
2 Normal AC -- -- --
Slot 2:
PowerID State Mode Current(A) Voltage(V) Power(W)
1 Normal AC -- -- --
2 Normal AC -- -- --
后续查看资料有关于电源模块的手册说明
Before you install a power module, make sure its airflow direction is as required.在安装电源模块以前,请确认电源模块气流方向和安装环境的通风要求一致。
Do not install power modules that provide different directions of airflow on the same device. 不同风向的电源模块不要混插在同一台设备上
建议使用一样型号的电源模块
更换同型号电源模块,若相同型号的模块还是告警,建议替换模块测试下
(0)
这个不一定是硬件故障是由于风扇模块的期望风险与实际风向不一致才有的报错
例子:下图有两行回显,需要当前风向改为和期望风险一致就不会报错
[H3C]fan prefer-direction solt 1 port-to-power /修改期望风向
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论