有错包且增长,但没有crc类型的,对端设备没错包,且替换链路后问题依旧,这是因为什么
%Aug 5 02:55:53:802 2025 CAI-BJ-HO-Internet-FW-02 IFMON/4/INPUT_ERROR_THRESHOLD: The number of input error packets exceeded the upper threshold: Interface name=GigabitEthernet1/0/1, upper threshold=1000, number of input error packets=1384, interval=10 s.
RBM_S<CAI-BJ-HO-Interdis int g1/0/1
GigabitEthernet1/0/1
Current state: UP
Line protocol state: UP
Description: GigabitEthernet1/0/1 Interface
Bandwidth: 1000000 kbps
Maximum transmission unit: 1500
Allow jumbo frames to pass
Broadcast max-ratio: 100%
Multicast max-ratio: 100%
Unicast max-ratio: 100%
Internet protocol processing: Disabled
IP packet frame type: Ethernet II, hardware address: 5cf7-96e5-8415
IPv6 packet frame type: Ethernet II, hardware address: 5cf7-96e5-8415
Media type is twisted pair, loopback not set, promiscuous mode not set
1000Mb/s, Full-duplex, link type is autonegotiation
Output flow-control is disabled, input flow-control is disabled
Output queue - Urgent queuing: Size/Length/Discards 0/1024/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Last link flapping: 8 weeks 4 days 22 hours 45 minutes
Last clearing of counters: Never
Current system time:2025-08-05 13:22:36
Last time when physical state changed to up:2025-06-05 14:36:57
Last time when physical state changed to down:2025-06-05 14:33:12
Last 300 second input: 2 packets/sec 189 bytes/sec 0%
Last 300 second output: 0 packets/sec 16 bytes/sec 0%
Input (total): 101536758 packets, 678823639 bytes
505 unicasts, 98163 broadcasts, 7130031 multicasts, 0 pauses
Input (normal): 7228699 packets, 678823639 bytes
505 unicasts, 98163 broadcasts, 7130031 multicasts, 0 pauses
Input: 94308059 input errors, 0 runts, 0 giants, - throttles
0 CRC, 0 frame, 0 overruns, 0 aborts
0 ignored, - parity errors
Output (total): 394233 packets, 83624062 bytes
5004 unicasts, 38078 broadcasts, 351151 multicasts, 0 pauses
Output (normal): 394233 packets, 83624062 bytes
5004 unicasts, 38078 broadcasts, 351151 multicasts, 0 pauses
Output: 0 output errors, 0 underruns, - buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, 0 no carrier
(0)
看看是否涉及光模块的不规范使用,检查下是否是我司
# 显示接口GigabitEthernet1/0/1上插入的可插拔接口模块的部分电子标签信息(本命令的显示信息与设备型号有关,请以设备的实际情况为准)。
表1-22 display transceiver manuinfo命令显示信息描述表
字段 |
描述 |
Manu. Serial Number |
在生产过程中生成的序列号 |
Manufacturing Date |
写入电子标签的日期 |
Vendor Name |
厂商名称 |
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论