H3C S6825-54HF 启动报错问题严重吗？

H3C S6825-54HF 交换机 恢复出厂设置了 但是重启过程中有 ERROR:Bootware feature reserve bits is not zero(uiFeatureEx) 报错

希望师傅帮忙分析下这个交换机硬件这些是否有异常呢？

这个报错影响交换机后续的使用吗？

下面是详细的启动过程：

System is Starting....
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to access BOOTWARE DIAG-TEST MENU
Booting Normal Extend Bootware
ERROR:Bootware feature reserve bits is not zero(uiFeatureEx)

********************************************************************************
*                                                                              *
*                     H3C S6825-54HF BOOTROM, Version 203                      *
*                                                                              *
********************************************************************************
Copyright (c) 2004-2022 New H3C Technologies Co., Ltd.

Creation Date         : Jun 16 2022
Memory Type           : DDR4 SDRAM
Memory Size           : 4096MB
Memory Speed          : 2133MHz
flash Size            : 3776MB
CPLD 1 Version        : 004
CPLD 2 Version        : 002
CPLD 3 Version        : 001
PCB 1 Version         : Ver.A
PCB 2 Version         : Ver.A
Mac Address           : 80616c7a6b85


BootRom Validating...
Press Ctrl+B to access EXTENDED BOOT MENU...0
Loading the main image files...
Loading file flash:/s6825-cmw710-system-r6635.bin...............................
................................................................................
...........Done.
Loading file flash:/s6825-cmw710-boot-r6635.bin........................Done.

Image file flash:/s6825-cmw710-boot-r6635.bin is self-decompressing..........
Done.
System is starting...


            Board checking.....................LSW148TG6HC
            SDRAM fast selftest........................OK!
            Flash fast selftest........................OK!
            CPLD selftest..............................OK!
            Switch chip selftest.......................OK!
            PHY selftest...............................OK!
            Please check leds....................FINISHED!
Cryptographic algorithms tests passed.
Line aux0 is available.


Press ENTER to get started.
******************************************************************************
* Copyright (c) 2004-2022 New H3C Technologies Co., Ltd. All rights reserved.*
* Without the owner's prior written consent,                                 *
* no decompiling or reverse-engineering shall be allowed.                    *
******************************************************************************

<H3C>%Jan  1 00:41:45:187 2015 H3C SHELL/5/SHELL_LOGIN: TTY logged in from aux0.

<H3C>