胖AP设置无线密码后无线用户连接上去ping不通网关

瘦AP转换成胖AP模式使用，一开始没有设置无线密码，后来设置无线密码后，终端用户使用静态ip地址输入无线密码后显示连接成功，但是ping不通网关

交换机和AP之间互连端口配置为trunk口，允许所有vlan通过；AP的管理vlan为vlan2，网段为192.168.2.0/24，无线终端用户的vlan为vlan1，网段为10.10.112.0/24，胖AP配置信息为 wlan service-template 1 clear ssid ykap service-template enable # wlan service-template 2 crypto ssid ykap cipher-suite ccmp security-ie rsn service-template enable # interface NULL0 # interface Vlan-interface1 ip address dhcp-alloc # interface Vlan-interface2 ip address 192.168.2.86 255.255.255.0 interface GigabitEthernet1/0/1 port link-type trunk port trunk permit vlan all # interface GigabitEthernet1/0/2 # interface WLAN-BSS1 port-security port-mode psk port-security tx-key-type 11key port-security preshared-key pass-phrase cipher $c$3$cyd2/o3g6kG8jrmWArcss9JfvnIed+uvFlEM # interface WLAN-BSS32 # interface WLAN-BSS33 # interface WLAN-Radio1/0/1 interface WLAN-Radio1/0/2 channel band-width 40 service-template 2 interface wlan-bss 1 # ip route-static 0.0.0.0 0.0.0.0 192.168.2.250 ip route-static 0.0.0.0 0.0.0.0 10.10.112.250 #