问

H3C-S5130S-52S-EI交换机4个万兆光口，无法与另一台千兆交换机上的千兆光口通信。

2018-11-18提问

0关注
1收藏，3614浏览

zhiliao_u9BoF

zhiliao_u9BoF 零段

粉丝：0人关注：0人

问题描述：

上一级H3C-S5120-48p-EI是一4个千兆的光口，插千兆光模块，与H3C-S5130S-52S-EI交换机4个万兆光口，插千兆模块。设置聚合链路。不通信。

interface Ten-GigabitEthernet1/0/49

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full

port link-aggregation group 1

interface Ten-GigabitEthernet1/0/50

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full

port link-aggregation group 1

interface Ten-GigabitEthernet1/0/51

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full

port link-aggregation group 1

interface Ten-GigabitEthernet1/0/52

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full

port link-aggregation group 1

另一个交换机配置如下：

interface GigabitEthernet1/0/49

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full

port link-aggregation group 1

interface GigabitEthernet1/0/50

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full port

link-aggregation group 1

interface GigabitEthernet1/0/51

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full

port link-aggregation group 1

interface GigabitEthernet1/0/52

port link-type trunk

port trunk permit vlan all

speed 1000

duplex full

port link-aggregation group 1

完

最佳答案

已采纳

怕辣的娜

怕辣的娜八段

粉丝：12人关注：2人

看一下物理口是不是没选中吧！

display link-aggregation summary

display link-aggregation verbose

<QS-N-2>display link-aggregation summary Aggregation Interface Type: BAGG -- Bridge-Aggregation, BLAGG -- Blade-Aggregation, RAGG -- Route-Aggregatio n, SCH-B -- Schannel-Bundle Aggregation Mode: S -- Static, D -- Dynamic Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing Actor System ID: 0x8000, 48bd-3d9a-b7c9 AGG AGG Partner ID Selected Unselected Individual Share Interface Mode Ports Ports Ports Type -------------------------------------------------------------------------------- BAGG1 D 0x8000, 0000-0000-0000 0 4 0 Shar

zhiliao_u9BoF 发表时间：2018-11-18

<QS-N-2>display link-aggregation verbose Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing Port Status: S -- Selected, U -- Unselected, I -- Individual Port: A -- Auto port, M -- Management port, R -- Reference port Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation, D -- Synchronization, E -- Collecting, F -- Distributing, G -- Defaulted, H -- Expired Aggregate Interface: Bridge-Aggregation1 Aggregation Mode: Dynamic Loadsharing Type: Shar Management VLANs: None System ID: 0x8000, 48bd-3d9a-b7c9 Local: Port Status Priority Index Oper-Key Flag XGE1/0/49 U 32768 49 2 {ACG} XGE1/0/50 U 32768 50 1 {ACG} XGE1/0/51 U 32768 51 2 {AC} XGE1/0/52 U 32768 52 2 {AC} Remote: Actor Priority Index Oper-Key SystemID Flag XGE1/0/49 32768 0 0 0x8000, 0000-0000-0000 {EF} XGE1/0/50 32768 0 0 0x8000, 0000-0000-0000 {EF} XGE1/0/51 32768 342 103 0x8000, 80f6-2ed4-419f {ACEF} XGE1/0/52 32768 150 103 0x8000, 80f6-2ed4-419f {ACEF} <QS-N-2>

zhiliao_u9BoF 发表时间：2018-11-18

好像都是“u” 都是乱的看不清楚，如果是u就是未选中的，那通信肯定不正常

怕辣的娜发表时间：2018-11-18

等下我排下版

zhiliao_u9BoF 发表时间：2018-11-18