U200-CA 怎样恢复出厂设置（密码全不知道）

console也设置密码了？重启的时候ctrl+b进到bootroom界面看看有没有格式化的命令。

1) 如果关闭了密码恢复功能，当用户忘记了配置的Console口密码或Super Password时，可以重启设备进入BootWare主菜单，选择<5>，即恢复设备的出厂配置，此时设备会自动删除启动时使用的配置文件。

Password recovery capability is enabled.

Note: The current operating device is cfa0

Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Clear Super Password |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTEND-ASSISTANT MENU

Ctrl+F: Format File System

Enter your choice(0-9): 5

(2) 系统出现如下提示信息，表明已经设置成功。

Because the password recovery capability is disabled, this operation can

cause the configuration files to be deleted, and the system will start up

with factory defaults. Are you sure to continue?[Y/N]Y

Setting...Done.

(3) 当再次出现BootWare主菜单时，选择<1>，设备开始启动。

(4) 启动后设备恢复出厂配置