S3600 怎么配置端口聚合

(1)        采用手工汇聚方式：

# 创建手工汇聚组1。

<H3C> system-view

[H3C] link-aggregation group 1 mode manual

# 将以太网端口Ethernet1/0/1至Ethernet1/0/3加入汇聚组1。

[H3C] interface Ethernet1/0/1

[H3C-Ethernet1/0/1] port link-aggregation group 1

[H3C-Ethernet1/0/1] interface Ethernet1/0/2

[H3C-Ethernet1/0/2] port link-aggregation group 1

[H3C-Ethernet1/0/2] interface Ethernet1/0/3

[H3C-Ethernet1/0/3] port link-aggregation group 1

(2)        采用静态LACP汇聚方式：

# 创建静态汇聚组1。

<H3C> system-view

[H3C] link-aggregation group 1 mode static

# 将以太网端口Ethernet1/0/1至Ethernet1/0/3加入汇聚组1。

[H3C] interface Ethernet1/0/1

[H3C-Ethernet1/0/1] port link-aggregation group 1

[H3C-Ethernet1/0/1] interface Ethernet1/0/2

[H3C-Ethernet1/0/2] port link-aggregation group 1

[H3C-Ethernet1/0/2] interface Ethernet1/0/3

[H3C-Ethernet1/0/3] port link-aggregation group 1

(3)        采用动态LACP汇聚方式：

# 开启以太网端口Ethernet1/0/1至Ethernet1/0/3的LACP协议。

<H3C> system-view

[H3C] interface Ethernet1/0/1

[H3C-Ethernet1/0/1] lacp enable

[H3C-Ethernet1/0/1] interface Ethernet1/0/2

[H3C-Ethernet1/0/2] lacp enable

[H3C-Ethernet1/0/2] interface Ethernet1/0/3

[H3C-Ethernet1/0/3] lacp enable

注意：只有端口的基本配置、速率、双工等参数一致时，上述端口在开启LACP协议之后，才能汇聚到同一个动态汇聚组内，实现端口的负载分担。