H3C MSR26-00 多宽带PPP拨号如何做负载分担？

interface Dialer11 nat outbound link-protocol ppp ppp chap user 02360361766 ppp chap password cipher $c$3$KOu9uzn+sSvEW7RUbdAGvrtpb4CnsVkh5Q== ppp pap local-user 02360361766 password cipher $c$3$6oY3XJXIms48yUd0NFzGonXYehBhxt/wBg== ppp ipcp dns admit-any ppp ipcp dns request mtu 1492 load-bandwidth 200000 ip address ppp-negotiate tcp mss 1024 dialer user username dialer-group 11 dialer bundle 11 ip user-based-sharing enable # interface Dialer12 nat outbound link-protocol ppp ppp chap user 02367395190 ppp chap password cipher $c$3$M3XKw8jNXuMtImmvf3PJpWFTNdvNtNdZxw== ppp pap local-user 02367395190 password cipher $c$3$pP7D0BgCh1bQA8tXmjNHrsDxTP/9Ih2QKw== ppp ipcp dns admit-any ppp ipcp dns request mtu 1492 load-bandwidth 200000 ip address ppp-negotiate tcp mss 1024 dialer user username dialer-group 12 dialer bundle 12 ip user-based-sharing enable # interface NULL0 # interface Vlan-interface1 ip address 192.168.1.1 255.255.255.0 dhcp server apply ip-pool vlan1 ip policy-based-route aaa # interface GigabitEthernet0/0 port link-mode route ip address 192.168.100.1 255.255.255.0 # interface GigabitEthernet0/1 port link-mode route nat outbound pppoe-client dial-bundle-number 10 load-bandwidth 200000 ip user-based-sharing enable # interface GigabitEthernet0/2 port link-mode route nat outbound pppoe-client dial-bundle-number 11 load-bandwidth 200000 ip user-based-sharing enable # interface GigabitEthernet0/3 port link-mode route nat outbound pppoe-client dial-bundle-number 12 load-bandwidth 200000 ip user-based-sharing enabl 都开启了， 还是掉包

接口下的 ip user-based-sharing enable配置到dialer口下

如果还不行的话，就要看看到底是哪里丢包了，还有个方法就是可以做策略路由，把不同的流量区分到不同的出口出去，做到负载