单位有几个h3c的ap,型号是WA4320-ACN-SI,根据网上的教程刷了fat的固件,并配置好fat模式后,手机在旁边连上去最高只有54m,在ap管理界面里看模式是11a。
怎么开启11ac呢,
Total Number of Clients : 1 Client Information -------------------------------------------------------------------------------
MAC Address : 34d7-129b-e520
User Name :
IP Address : 192.168.0.192
IPv6 Address : -NA- AID : 1
Radio Interface : WLAN-Radio1/0/1
Service Template Number : 2
SSID : JHJF
BSSID : 38ad-bed4-e820
Port : WLAN-BSS1
VLAN : 1
State : Running
Power Save Mode : Sleep
Wireless Mode : 11a
QoS Mode : WMM
Listen Interval (Beacon Interval) : 1
RSSI : 50 Rx/Tx Rate : 6/54 Client Type : WPA Authentication Method : Open System Authentication Mode : Central AKM Method : PSK Key Derivation : SHA1 4-Way Handshake State : PTKINITDONE Group Key State : REKEYESTABLISHED Encryption Cipher : TKIP PMF Status : -NA- Roam Status : Normal Roam Count : 0 Up Time (hh:mm:ss) : 00:10:00
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
您好,根据您的回答,我找教程配置成了wpa2,速率变成了144mbps,但不能变为更高了,我记得5G的wifi速率有好几百兆,我手机就在ap旁边实验,谢谢啦
弄好了 谢谢,刚是2.4g,没注意到,换成5g就变成866mbps了