请问wa2610e-gne怎么在bios下传固件，顺便求一个此路由的胖固件下载链接

大哥请问怎么在bios界面传固件

3. 在AP重启的时候按住Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。 ===============<EXTEND-BOOTWARE MENU>========================= |<1> Boot System |<2> Enter Serial SubMenu |<3> Enter Ethernet SubMenu |<4> File Control |<5> Restore to Factory Default Configuration |<6> Skip Current System Configuration |<7> BootWare Operation Menu |<8> Clear Super Password |<9> Storage Device Operation |<0> Reboot =============================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): Ctrl+F y Enter your choice(0-9): 3（此处输入） ================<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And Run |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> ============================================================= 4. 进入修改以太网参数菜单，使用TFTP网络协议传输wa2600a_fat.bin到AP上 Enter your choice(0-5): 5 ===========<ETHERNET PARAMETER SET>===================== |Note: '.' = Clear field. | '-' = Go to previous field. | Ctrl+D = Quit. =============================================================== Protocol (FTP or TFTP) : TFTP //忽略输出内容，直接输入TFTP，然后回车 Load File Name : wa4300_fat.bin //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Target File Name : wa4300_fat.bin //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Server IP Address :192.168.0.1 //忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车 Local IP Address :192.168.0.50 //忽略输出内容，直接输入呵电脑主机的ip同一网段，比如192.168.0.50，然后回车 Gateway IP Address :0.0.0.0 //忽略输出内容，直接回车 备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达，能ping通 =============<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> ============================================================= Enter your choice(0-5): 2 //此时可以看到TFTP服务器上数据上传的滚动 Loading..................................................................... ....................................Done! 5. 返回主菜单，查看设备上是否真的已经上传了该软件版本 =================<Enter Ethernet SubMenu>========================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And R |<2> Update Main Application File |<3> Update Backup Application Fil |<4> Update Secure Application File |<5> Modify Ethernet Parameter ||<0> Exit To Main Menu |<Ensure The Parameter Be Modified Before Downloading!> |================================================================= Enter your choice(0-5): 0 ===============<EXTEND-BOOTWARE MENU>=========================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot ========================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 4 =====================<File CONTROL>=============================== |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ============================================================== Enter your choice(0-3): 1 Display all file(s) in flash: 'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED |NO. Size(B) Time Type Name ||1 9124864 Aug/08/2008 20:00:00 M wa2600a_fat.bin ============================================================== 6. 返回主菜单，将设备进行重启 |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ================================================================= Enter your choice(0-3): 0 ==================<EXTEND-BOOTWARE MENU>=========================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot ================================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 0 System is starting... 7. 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。

ping butong

但是我可以用超级终端连接

请问这里可以修改 ip吗

大哥有联系方式吗？可以帮我看下不