[H3C]
<H3C>
<H3C>
<H3C>inter g0/0
^
% Unrecognized command found at '^' position.
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]
<H3C>ip add 192.168.1.1
^
% Unrecognized command found at '^' position.
<H3C>reset save
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file does not exist!
<H3C>reset save
The saved configuration file will be erased. Are you sure? [Y/N]:Y
Configuration file does not exist!
<H3C>reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
Current configuration may be lost after the reboot, save current configuration? [Y/N]:N
This command will reboot the device. Continue? [Y/N]:Y
Now rebooting, please wait...
The specified boot file does not exist.
<H3C>
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]inter g0/0
[H3C-GigabitEthernet0/0]ip add 192.168.1.1
^
% Incomplete command found at '^' position.
[H3C-GigabitEthernet0/0]ip add 192.168.1.1
^
% Incomplete command found at '^' position.
[H3C-GigabitEthernet0/0]ip add 192.168.0.1
[H3C]dis int brief
Brief information on interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
GE0/0 DOWN DOWN --
GE0/5 DOWN DOWN --
InLoop0 UP UP(s) --
NULL0 UP UP(s) --
REG0 UP -- --
Vlan1 DOWN DOWN 192.168.1.1
Brief information on interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Speed or Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
GE0/1 DOWN auto A A 1
GE0/2 DOWN auto A A 1
GE0/3 DOWN auto A A 1
GE0/4 DOWN auto A A 1
WLAN-Radio0/0 UP -- -- -- --
[H3C]inter g0/0
[H3C-GigabitEthernet0/0]ip add 192.168.1.1 24
This subnet overlaps with another interface!
[H3C-GigabitEthernet0/0]qu
[H3C]
<H3C>reset save
The saved configuration file will be erased. Are you sure? [Y/N]:Y
Configuration file does not exist!
<H3C>
[H3C] <H3C> <H3C> <H3C>inter g0/0 ^ % Unrecognized command found at '^' position. <H3C>sys System View: return to User View with Ctrl+Z. [H3C] <H3C>ip add 192.168.1.1 ^ % Unrecognized command found at '^' position. <H3C>reset save The saved configuration file will be erased. Are you sure? [Y/N]:y Configuration file does not exist! <H3C>reset save The saved configuration file will be erased. Are you sure? [Y/N]:Y Configuration file does not exist! <H3C>reboot Start to check configuration with next startup configuration file, please wait.........DONE! Current configuration may be lost after the reboot, save current configuration? [Y/N]:N This command will reboot the device. Continue? [Y/N]:Y Now rebooting, please wait... The specified boot file does not exist. <H3C>
老大,我是小白,不知是否操作正确,不过进不了1:的IP设置啊
你看我发你的命令,一步一步来1和2是两个方案,1要先sys回车 再int
好像是用户视图和系统视图不对,我再试试
<H3C>sys System View: return to User View with Ctrl+Z. [H3C]inter g0/0 [H3C-GigabitEthernet0/0]ip add 192.168.1.1 ^ % Incomplete command found at '^' position. [H3C-GigabitEthernet0/0]ip add 192.168.1.1 ^ % Incomplete command found at '^' position. [H3C-GigabitEthernet0/0]ip add 192.168.0.1
我的错 ip add 192.168.1.1 24
因为按照这里的教程设置192.168.1.2也进不去后台,按您的指点出现上面的提示,不知如何操作了
sys然后int g0/0 再ip add 192.168.1.1 24 再qu 然后给电脑配置一个192.168.1.2的地址,打开浏览器输入http://192.168.1.1
[H3C-GigabitEthernet0/0]ip add 192.168.1.1 24 This subnet overlaps with another interface!
其他接口上配置得有这个段的ip地址,dis int brief 看看是哪个接口
好的老大,电脑用网线链接GE1口还是用console线连接GE1口设置?
[H3C]dis int brief Brief information on interface(s) under route mode: Link: ADM - administratively down; Stby - standby Protocol: (s) - spoofing Interface Link Protocol Main IP Description GE0/0 DOWN DOWN -- GE0/5 DOWN DOWN -- InLoop0 UP UP(s) -- NULL0 UP UP(s) -- REG0 UP -- -- Vlan1 DOWN DOWN 192.168.1.1 Brief information on interface(s) under bridge mode: Link: ADM - administratively down; Stby - standby Speed or Duplex: (a)/A - auto; H - half; F - full Type: A - access; T - trunk; H - hybrid Interface Link Speed Duplex Type PVID Description GE0/1 DOWN auto A A 1 GE0/2 DOWN auto A A 1 GE0/3 DOWN auto A A 1 GE0/4 DOWN auto A A 1 WLAN-Radio0/0 UP -- -- -- --
你先dis int brief看看哪个接口配置的有192.168.1.x的ip,然后电脑接上去,配上同网段的地址,浏览器使用http://192.168.1.x的地址登录就好
找一个lan口接上去就好
好的老大,Vlan1是GE1口对吗?
你设备具体型号是什么
老大,是MSR810-w-winet,刚才按照您这个接上网线改192.168.1.2,还是进不去,懵
接的是GE1口,正常亮,流量也有走,只是进不了web管理后台
[H3C]inter g0/0 [H3C-GigabitEthernet0/0]ip add 192.168.1.1 24 This subnet overlaps with another interface! [H3C-GigabitEthernet0/0]qu [H3C] <H3C>reset save The saved configuration file will be erased. Are you sure? [Y/N]:Y Configuration file does not exist! <H3C>
你在电脑上ping一下192.168.1.1看通不通,通的话sys在ip http enable然后ip https en再local-user admin 再service-type http https
老大,遇到上面这个情况,还咋样处理,求指点
插在ge1上
来自 192.168.1.1 的回复: 字节=32 时间<1ms TTL=255 192.168.1.1 的 Ping 统计信息: 数据包: 已发送 = 4,已接收 = 4,丢失 = 0 (0% 丢失), 老大,这应该是通的吧,但是con连接代码如下:[H3C]ip http enable ^ % Unrecognized command found at '^' position. [H3C]ip http en ^ % Unrecognized command found at '^' position.