问题描述:
wa4320正常获取ip地址,网络正常,但是ac控制器上无法上线。不知道是不是跟什么软件bug有关。以前用着好的。突然就从控制器里掉线了,无法连接上控制器。ap报错:dis inte Vlan-interface 1
Vlan-interface1 current state: UP
Line protocol current state: UP
Description: Vlan-interface1 Interface
The Maximum Transmit Unit is 1500
Internet Address is 192.168.1.126/24, acquired via DHCP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 3891-d59a-7f60
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 3891-d59a-7f60
Last clearing of counters: Never
%Apr 26 12:00:36:524 2000 WA4320-ACN LLDP/6/LLDP_CREATE_NEIGHBOR: New neighbor created on Port GigabitEthernet1/0/1 (IfIndex 9437184), Chassis ID is 3897-d6bb-3250, Port ID is GigabitEthernet1/0/4.
%Apr 26 12:00:59:118 2000 WA4320-ACN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.
%Apr 26 12:01:04:117 2000 WA4320-ACN WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.
%Apr 26 12:01:44:151 2000 WA4320-ACN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.
%Apr 26 12:01:49:141 2000 WA4320-ACN WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.
%Apr 26 12:02:29:239 2000 WA4320-ACN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.
%Apr 26 12:02:34:229 2000 WA4320-ACN WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.
组网及组网描述:
wa4320正常获取ip地址,网络正常,但是ac控制器上无法上线。不知道是不是跟什么软件bug有关。以前用着好的。突然就从控制器里掉线了,无法连接上控制器。ap报错:dis inte Vlan-interface 1
Vlan-interface1 current state: UP
Line protocol current state: UP
Description: Vlan-interface1 Interface
The Maximum Transmit Unit is 1500
Internet Address is 192.168.1.126/24, acquired via DHCP
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 3891-d59a-7f60
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 3891-d59a-7f60
Last clearing of counters: Never
%Apr 26 12:00:36:524 2000 WA4320-ACN LLDP/6/LLDP_CREATE_NEIGHBOR: New neighbor created on Port GigabitEthernet1/0/1 (IfIndex 9437184), Chassis ID is 3897-d6bb-3250, Port ID is GigabitEthernet1/0/4.
%Apr 26 12:00:59:118 2000 WA4320-ACN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.
%Apr 26 12:01:04:117 2000 WA4320-ACN WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.
%Apr 26 12:01:44:151 2000 WA4320-ACN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.
%Apr 26 12:01:49:141 2000 WA4320-ACN WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.
%Apr 26 12:02:29:239 2000 WA4320-ACN WMSH/6/WMESH_EXIT_ZERO_CFG_STATE: The device has exited zero configuration state.
%Apr 26 12:02:34:229 2000 WA4320-ACN WMSH/6/WMESH_ENTER_ZERO_CFG_STATE: The device has entered zero configuration state.
到ac控制器肯定通的,dhcp就是做再ac控制器上的,ip地址能获取到。其他ap都正常。不是网络问题。还有没有可能其他问题????